.png.279748a58a2b862b7aa5f3b84126e232.png)
Equipment
Board provided for discussions about equipment
9,571 topics in this forum
-
- 3 followers
- 18 replies
- 782 views
I used to have a brilliant Petrol harness. It is gone, and in its place is my old Versaflex harness. Today my shoulders just about died. I miss my petrol harness. So of course they don't make it anymore. I see some nice looking ones from Orca and Portabrace and Versaflex. I have a heavy bag that I almost never wore because it had been years since I worked an actual run and gun gig. I took out some rx and made the bag as light as possible, but it's still a beast. My back and feet are fine, it's just the harness digs into my shoulders. I'm quite intrigued by the short bag version from Versaflex. I like wearing the bag tight and high up so the bottom i…
Last reply by Display Name, -
- 1 follower
- 19 replies
- 894 views
My thoughts on Schoeps CMD42 and why Zaxcom Nova “oneunit” is too heavy! 🙂 I am very excited about the Schoeps CMD42 AES42 digital amp. I have been using schoeps exclusively for 6+. Ever since my sennheiser MZD8000 digital AES42 amp died. I was using a digital mic preamp for a long time as well before my MZD8000 died. There is multiple advantages of using AES42. In my opinion the sooner the signal chain becomes digital the better for the sound quality and reliability. Aes42 is IMHO the right approach. No need for analog cable runs ,analog front end pres and Analog to digital converter. No more power and RF interference, buzz, crackl…
Last reply by Patrick Tresch, -
- 0 replies
- 27 views
I'm going to work on a feature film and the caméra crew will use a Red Gemini. Did some of you work with this cam ? Is it noisy ? Because a few years ago I worked wih a RED camera (don't remenber wich one) and it was a nightmare, between takes it was a constant hair dryer noise, and during takes the fan could increase the speed and the noise...
Last reply by Martin67, -
Sonosax M2D2 1 2 3 4 5
by Trey LaCroix- 7 followers
- 124 replies
- 33.8k views
SX-M2D2 Product Announcement The SX-M2D2 is a lightweight 2 channels high resolution dual-domain microphones preamplifier with integrated USB audio Class 2. Compact, low power, battery powered, the SX-M2D2 embeds similar high performance dual A/D converters than the SX-R4+. This product is the ideal companion for various mobile environments. Its ergonomic has been carefully designed for convenience and easy of operation. Inputs / Outputs 2x mic/line inputs on TA3, electronically balanced, with phase reversal, 48V phantom, LF cut and level control on the front panel 1x AES3/AES42 on TA3, transformer balanced inp…
Last reply by Patrick Tresch, -
- 5 followers
- 9 replies
- 539 views
Hello all, Anyone care to share their storage and caddy options for rechargeable AA batts? When I used to use rechargeables, I used Powerpax caddies. A battery with the positive pin pointing down/in meant "charged"; pointing up/out meant "dead". You could do a quick visual check of your battery status, and it worked just fine, for a time. After a while, repeated insertion/removal of the batteries from the caddy would strip the outer wrap, and the batteries would short when placed in gear. I'm considering a possible return to rechargeables, and looking for alternatives. Thanks!
Last reply by VASI, -
- 10 replies
- 980 views
Johan Hellsten posted this to YouTube yesterday: Easyrig Boom Rig Release Video The price is US$2200 with vest. Gotham Sound (Nick Huston) discussed the product with Hellsten at NAB yesterday. From 8:50:
Last reply by evarsimon, -
- 2 followers
- 9 replies
- 423 views
Hi! I'm new to the group thanks for letting me in. I'm into filmmaking and sound for film, with particular interest lately in audio electronics. I'm looking for a shotgun to use with a preamplifier circuit I made myself running on 12-9V battery power, so I'm trying to skip phantom power. So far I've only used electrets with it, but discovering recently that some condenser mikes take lower voltages (P12, T-power). Quite interested currently to try on a T-powered 416, since I have a 416-P48U already and, even though off axis sounds spooky sometimes, it is very low noise. I really dislike hiss because I record details quite amplified. I'm thinking to se…
Last reply by Patrick Farrell, -
- 2 followers
- 15 replies
- 530 views
Anyone try one of these yet? If so, what’s your opinion? Obviously curious how it stands up to a standard Comtek.
Last reply by The Documentary Sound Guy, -
- 2 followers
- 36 replies
- 1.8k views
So I will order 2x TritonAudio - FetHead Phantom This will add 18 dB amplification/gain to my condenser mic and preamp And I will make a separate theme so as not to interfere another ‘Sennheiser Previews MKH 8030 figure-of-eight’ theme that is under way. I want to make several tests: 1. Using two Fetheads in the same chain (for shotgun Schoeps MiniCMIT GR) So I will get 18 dB + 18 dB = 36 dB Extra gain. I would like to use it to record from far away, for example in a zoo where I can't go very close to animals. 2. Using them for stereo microphones to get extra 18 dB (for my Shure VP88, two pcs are needed for this stereo microphone). Planned to re…
Last reply by DHB, -
- 7 replies
- 363 views
[That's a quote from Olle in this thread. I'm replying in this new thread because I'd love to read people's experiences and thoughts on this approach -- Jim] Olle, I might be misreading your thought, but I too think a belt might work since for me (my bags are small (633, a few RX, a TX, etc...maybe something smaller soon). Two belts I know of: K-Tek KSWB1 – Stingray Waist Belt https://ktekpro.com/product/kswb1-stingray-waist-belt/ ORCA OR-370 Advanced Audio Waist Belt https://www.orcabags.com/product/or-370-advanced-audio-waist-belt/ Who here has used belts with bags? How big a bag worked...and what size was …
Last reply by Mattias Larsen, -
- 5 followers
- 14 replies
- 752 views
Hello people, A while back I posted about the hardwired CL-Wifi that I made that works much better than the wireless one, and people seemed to like the idea but it was pretty hacky. In setting up an ethernet network on my cart, I realized that the IP address of the CL-Wifi is hardcoded into the app, so I couldn't get it to reliably be a part of my cart's network. I wanted to see if I could write a Windows Forms app that controlled the 788T via the C. Link port, and in the process discovered that all of this can be done over a hardline on the 788's usb port. I've been able to successfully send commands to it and get responses from it using nothi…
Last reply by Jesse Flaitz, -
- 0 replies
- 107 views
The Rycote Nano Shields are connected to the handle via a quick-release coupling. In my case, this connection is not quite tight and when I hold the Nano Shield by the handle, the basket moves by a few millimetres and you can hear a rattle in the recording. When I put the Nano Shield on another Rycote coupling, it sits firmly. May I ask about the experiences of other Nano Shield users, is the handle firmly attached in your case? I would like to find out if I have a defect handle or if it is a design problem. Thank you, Toby.
Last reply by wildit, -
- 1 follower
- 2 replies
- 167 views
Anyone have current info/experience? Much appreciated!
Last reply by Tom E, -
- 4 followers
- 13 replies
- 790 views
Hi. I have just learnt about this company making power generator out of rechargeable batteries (a BIG portable. battery with built in AC converter basically) specially tailored for film work. Overkill for sound equipment but what it means is no more damn noisy, stinky and polluting fuel generators on set! An that is great news for us all. It is a french company but I am sure their products will spread to the rest of the world soon if not already. As a matter of fact I heard about them from a gaffer in Kenya and the company is based in my home town Marseille 😅 worth spreading the word to our gaffer and producer friends: https://pessenergy.com/en/
Last reply by Olle Sjostrom, -
- 27 replies
- 1.8k views
Hello World, Seems like the beta phase of Schoeps CMD 42 is over and Schoeps gonna release it in April 13th 2024. It is compatibility with all MK capsules and Colette accessories. AES42 Mode 1 & Mode 2. CMD Remote App to handle all the settings. From my limited market research, it has price tag around 1.000 euros. Not sure about dollar price. Wireless Transmitters Compatibility: - Sound Devices A20-TX - Zaxcom TRX745 - Zaxcom TRX743 More information: https://schoeps.de/en/products/colette/microphone-amplifiers/cmd-42-beta.html
Last reply by VASI, -
- 1 follower
- 2 replies
- 281 views
I am currently comparing Lemo cables with XLR cables for Schoeps microphones. I have no experience with Lemo and was surprised: The Lemo cables on CCM seem to me to be much more sensitive to handling noise (from touching etc.) than the CMC 1U with XLR cable. Is this due to the design or am I doing something wrong? Full disclosure: I'm not using them in a suspension: the CCM is in the SGC clip on a mini table stand, the CMC 1U in the XLR clip. Like an interview scenario for two people with mics placed on the table. The difference between XLR and Lemo is pretty drastic even when I just lightly touch the cable. Can you onl…
Last reply by flohma, -
- 3 followers
- 64 replies
- 4k views
I will start by saying I'm not a professional, and probably won't ever be a professional. That said, I do a fair amount of remote recording, and am looking to upgrade my recorder. I'm currently using a sound devices 552 preamp and recording using a zoom f6, but I'm exploring upgrading to a new (to me) Nagra VI, AETA 4MINX, Sonosax R4+, or Zaxcom Nova 2. This seems like the place with the most members with experience with most of these recorders, so I was looking for opinions. I was pretty set on the 4MINX, but some of the posts on here talk about distortion, so I was wondering how common that might be? My microphones are DPA 4015s and 4018s, and I'll probably a…
Last reply by Fred Salles, -
- 37 followers
- 1.8k replies
- 541.4k views
Inspired by the "View from the office" thread, i am pretty curious as to what bags people haul around, and what gear is in it. So, this threads purpose is pretty simple. Show me your bag, give a little description of what it contains, and what type of gigs you normally do. My "bag": The thing is, i have no bag yet. No cart either. So what you see, is what i have, the rest is rented for every gig. Gear list: Sound Devices 442 Sennheiser G3 kit Røde Lavalier Røde NTG-3 AKG K-271
Last reply by RadoStefanov, -
- 3 followers
- 28 replies
- 3.6k views
https://www.newsshooter.com/2023/09/15/sennheiser-previews-mkh-8030-figure-of-eight-rf-condenser-microphone/
Last reply by Throwback, -
- 1 follower
- 13 replies
- 2.3k views
I've been semi retired and had not plugged the machine in years. Seemed to be OK til yesterday when I turned it on and it didn't come up. So I pulled it apart, there's a lithium button cell in there, it had 1 volt instead of three. Machine came up when I put it back together. If you are comfortable with pulling a computer apart it's an easy fix. You have to remove the time code unit from the deck, and pull the power supply board. Now whether it was the cell or a dirty contact is still a mystery. I'd been using it as time code source, but now I have LTC Jumpstart it can go to EBay or the trash. Or I'll store it with the Nagras.;-)
Last reply by DHB, -
- 2 followers
- 21 replies
- 1.5k views
For those of us in the Lectro ecosystem: the digital successor to the SSM was just announced. https://www.gothamsound.com/product/dssm-digital-transmitter
Last reply by codyman, -
- 1 follower
- 3 replies
- 606 views
Maybe too soon, too painful as the body is still warm.. but, what have you been considering for the future?
Last reply by Yves marie omnes, -
- 2 followers
- 30 replies
- 6.4k views
Any of you using one,and is it much better than the analogue KMR 81?
Last reply by lyrnxG, -
- 1 follower
- 3 replies
- 1.6k views
The Comtek BST 75-216 has different EQ options: Pro Audio EQ or Communication. Does anyone have experience of what these actually sound like? One of the Communications EQ versions allows you to use it to drive a Phonak Invisity earwig which would be handy but I wouldn't want to sacrifice too much of the listening experience when using the PR216 to listen to program sound. all the best SW
.jpg.60deb0716219777743dadbbc5c367e0c.thumb.jpg.1c9a3a88e16c9817f9ba0b039743d08a.jpg)
Last reply by Michael Wynne, -
- 2 followers
- 5 replies
- 543 views
So, apologies if this has been discussed recently, but I couldn't find it. I'm buying an SRc for a friend (no, really!) and need to know the skinny on what's going on at the FCC in terms of the future. What would you buy today? A1, B1 or 941? Committed to Lectro, only. Getting out of C1. The 941 maybe less traffic, but it's only one block! Discuss, please.
Last reply by Conor,
