Equipment
Board provided for discussions about equipment
9,566 topics in this forum
-
- 6 replies
- 1.4k views
Hi everyone, I've just tried my new oktava's mk 012 in the shoot of a documentary. Although I was very pleased with the sound sometimes I had problems with rf interference on the mic. Anyone has already experienced this with oktavas? Is there a workaround solution for this. I've read somewhere else that ferrite beads attached to the cable could be a solution.
Last reply by studiomprd, -
- 7 replies
- 1.3k views
As the Nomad was created mostly with ENG/docu type jobs in mind and is mostly being used in that field judging form what owners write on JWS, I would like to give a short review on my experiences with it on a fiction/drama show. I stepped in for another mixer who couldn't make the first week of her shoot, and since I had my Nomad with me working fine I decided to give it a try. I would have liked to use it with the Mix-8 but that functionality is not working yet, so I decided to mix on the Nomad's rotary faders which is certainly not ideal, but bearable for four days. Last year I did the same with a 788/CL8 combo and there were no complaints. The technical setup…
Last reply by Chris McCallum, -
- 1 follower
- 14 replies
- 1.6k views
any leads would be great! it can charge one L7s but cant charge more than that. the unit looses power and craps out.... help!
Last reply by Marc Wielage, -
- 13 replies
- 2k views
Awesome product and I am totally satisfies with mine but... Users please be carful when plugging USB cables/ devices into the unit. While in the darkness I reached for my Middle Atlantic USB light so I could plug it into the BDSv4u, and then no longer be in the darkness. Well as Murphy's law likes to always have it's effect on me, I bent one if the pins inside the USB port. The light wouldn't go in all the way. I then had to roll and think about it later. Well, suddenly my NP batteries were dying after less than an hour of use. (previous to the bending of the USB pins I was getting almost 3 hrs of use with a Deva V, 4 Lectrosonics 411As, and a Lectrosonics IFB T4). …
Last reply by jason porter, -
- 2 followers
- 13 replies
- 1.3k views
Just had one of those "winning the lottery" experiences. My early model LM block 21 Tx had stopped working; powered up then shut down. Panavision (John Barrys) is the agent here in Sydney. Dropped it off two weeks ago and was told it may have to go to US. Got a call yesterday to say it was ready. When I picked it up today I was very surprised to receive a brand new unit AT NO CHARGE! Covered under extended warranty as it had been repaired before. Cheers to Lectro service and cheers to John Barry's for doing it without even freight charge!
Last reply by Jason A, -
- 8 replies
- 1.1k views
If you have had problems updating your QRX option board from the TRX there is new software available. TRX version 730F has been posted on the Zaxcom user forum. If you install this new software in your TRX your should have no problem updating your option board software now.
Last reply by John Blankenship, -
- 1 reply
- 984 views
Hi everyone, Just received this link from my Irish friend after we discussed the upcoming release of Timecode Buddy. Any of you know if this might be worth a try? It certainly looks simple and a bit cheaper than the TC Buddy. Just curious. Cheers,
Last reply by Matt Bacon AMPS, -
- 1 reply
- 692 views
Hi does anyone have the problem of the epic and scarlet camera disabling audio when they power up? i have this problem and every time they change battery i have to un-plug and plug my audio cable in to get the camera to enable audio? Thanks
Last reply by Jason Todd, -
- 14 replies
- 2.3k views
Does anyone have some photos and information regarding the usefulness of a few of these Zaxcom accessories? -Filter Dipole Antenna for a 900aa with stereo adapter (does it help? Is it worth the money? What does it look like?) - Belt Clip for Belt-Pack style transmitters (Is this simply a replacement wire piece that fits on a 900lt or is this something different?) -2.4ghz Directional Antenna -2.4ghz Omnidirectional antenna Any words of wisdom on a MicPlexer versus a different antenna distribution system? I have been eyeing up the new PSC RF SMA unit but haven't seen a price on it yet. I would personally love to A/B the MicPlexer with the PSC unit …
Last reply by MatthewFreedAudio, -
- 42 replies
- 4.4k views
So I went and bought a QRX100 to use as a wireless camera link. I powered it from Sony NP-F battery and an Ikan sled. The very first day shooting exterior in cold weather the unit stopped passing audio after about 3 hours. The lights and display were still on but the QRX was unresponsive. Unplugging and replugging the battery fixed that, but now I was nervous. The same problem got worse all day and by the afternoon I went back to feeding the camera by cable which was difficult because we were downhill skiing! After the day was done I got back to the hotel to try and do some troubleshooting only to find that my brand new QRX would not even power up. Totally dead. …
Last reply by Derek H, -
- 10 replies
- 1.5k views
Hi guys, A friend of mine yesterday had an issue with his nagra VI. While recording , he couldn't keep on copying at the same time into the flash card( card was not full at all). He decided to keep recording on the internal hard disk. After the shooting he tried to transfer the data to a computer, but the computer didnt recognized the Nagra. No indication what so ever of a device connected to the computer. So, suddently there's an issue with the Nagra's USB. Has anybody here had the same problem before? Thank you very much, Marco
Last reply by Marc Wielage, -
- 4 replies
- 969 views
I was :20 minutes into what was going to be a very long roll and suddenly all levels and input/ output activity ceased!! I only had 4 tracks recording and was merely streaming the L and R track to camera. Once the DP became aware that he wasn't getting signal into his hops they cut and I hit stop, hoping it would "wake up" but it did not. I hit record again, just to see if there wasn't an easy fix, but I had to power cycle the 788 to get it to stream audio again. After that, we rolled for three hours straight, with no issues at all. I opened up the front of my Petrol bag, just in case it was heat related, but that didn't really make sense to me. The only thi…
Last reply by Matt Bacon AMPS, -
- 24 replies
- 2.2k views
I don't see a thread on this here at JWSound, but I think it's a worthwhile topic: Do any of us sound mixers frequent the practice of taking out loans or pulling out credit cards in purchasing gear as opposed to saving up your money first no matter how long that may take? For the sake of conversation, I am talking about the more expensive investments such as multitrack recorders, soundcarts, wirelesses, etc. I've been deliberating back and forth about busting out my credit card for the sake of investing in more wirelesses. Thanks in advance!
Last reply by José, -
- 12 replies
- 1.3k views
It's after hours, so I'm asking here. I'm using a rental kit with an older zaxcom hop. Been using it for a week now and today a few hours in to filming ch 2 is not being sent. I power cycled the tx, swapped cables etc. I am feeding two cameras. I have isolated it to the TX. Is there something I am missing that could have bumped in the bag and put the tx into single channel mode? I checked the setup menu and it is on Fo2. I'm kind of stumped so far. Nothing I could find in the manual to explain it.
Last reply by glenn, -
- 5 replies
- 934 views
http://www.audiocheck.net/ wolf
Last reply by VASI, -
- 5 replies
- 1.9k views
This is kind of a funny thing to ask, but where can I find the colored stickers used on the 788t for the CL8 pots and the 788t pots as well?
Last reply by Audio Daddyo, -
- 1 follower
- 15 replies
- 2.1k views
Hey, Just saw the Nomad thread saying the 788 has worse sounding limiters than the 442. That was of course an opinion but I have found that simply setting the limiters on the 788 to match those on the 442 according to the specs in the manual is a huge improvement. FWIW. Matt
Last reply by chris_bollard, -
- 1 follower
- 106 replies
- 7.9k views
what happened? Just curious cause I have been thinking of ordering Nomad and trying getting informatation from users. That post was worth to solve the current problem openly. Uhmmmm...
Last reply by RadoStefanov, -
- 6 replies
- 2.2k views
Noob question here. I'm looking into picking up the Sennheiser ew112p G3 wireless lav mic but there are three wireless band versions. I'm going to be using it mostly in the NYC area. What band would you recommend for such locations. Thanks!
Last reply by Rick Reineke, -
- 21 replies
- 2k views
Is block 22 currently in much use in the US (or elsewhere) for wireless? I ask as I have a couple of Audio Ltd wireless that I used to use as my camera hop/extra wires, but spectrum rejigs over the last few years have effectively killed their use in the UK. Strictly speaking these units were 'fixed site' only, so I was always being a bit naughty running them but they were very reliable. Karma has caught up with me and now TV transmissions seem to be on those frequencies! They are in extremely good condition (much better than my very worn CH69's) so it seems a shame to use them as paperweights if they can go travel the world...If it's worth selling I'll put them …
Last reply by soundslikejustin, -
- 10 replies
- 2k views
Are there any pre-made solutions for raincovers out there? I've searched the boards here, and it seems as though everyone is having them custom made. I'm looking for something to wrap up a Rastorder Foldup cart...
Last reply by syncsound, -
- 22 replies
- 3.6k views
I've been buying stuff and fluffing up my toolbox with the usual barrels, adapters, cables and connectors. Any secret weapons we should all know about for typical or atypical situations that you're finally ready to talk about? Any 'once in a lifetime' war stories are welcome.
Last reply by studiomprd, -
- 2 replies
- 880 views
Can any MKE-2 lav mic be re-wired to plug into a G3 transmitter?
Last reply by OmahaAudio, -
- 1 follower
- 39 replies
- 5k views
This giant photo/audio/video retailer has become the poster child on this site for indifferent big box retailing. It is a big box, high volume shop but, from my recent experience, it’s hardly indifferent. I was recently visiting in New York and decided to drop in and check out the actual store. Like many of you, I’ve been receiving their catalog for years but have never been a customer. (The catalog just arrived one day; I guess I’m on a list.) Besides, I had need of a camera filter that I wasn’t finding at my usual sources. So, we trekked over to 34th street between 8th & 9th Avenues. It’s a big operation, as this photo I cribbed from the Internet sho…
Last reply by Nicole Hankerson, -
- 23 replies
- 3.2k views
My schoeps cmc641 suddenly developed a rattling noise when I swing it side to side- I can only hear it through the headphones- not by putting my ear next to it. It almost sounds like there is a very small grain loose inside it. It was working perfectly fine two days ago. Has anybody had this problem? Oh, and I tried switching cables and inputs. Im pretty sure its the mic. Thanks, Jon
Last reply by sdog,
