-
Posts
53 -
Joined
-
Last visited
Content Type
Forums
Gallery
Store
Everything posted by 100sideprojects
-
-
Nice builds!
-
Stainless steel cable and clear heatshrink. Thanks Simmiz
-
Good idea! I didn't think of that.
-
Recently I switched from a SD664 to a 633. Naturally a new bag was in order, so here are some of the pictures!
-
Thanks aginzo! Everything except for the stand is machined parts.
-
Another TA5 low profile! Not right angle this time
100sideprojects replied to 100sideprojects's topic in Do It Yourself
Send me your address! -
Another TA5 low profile! Not right angle this time
100sideprojects replied to 100sideprojects's topic in Do It Yourself
Thanks Mike! Unfortunately every time I send the caps to someone, they can't install them properly. Mostly because they are not as technically savvy as they claim to be or their cable guy does not care enough to do a proper job. Then the complaining starts and it really is not worth the time. What I can do is send you a few pieces to try out, if you like them we can talk more. -
This could be me & my foldup cart...
100sideprojects replied to Rob Stalder's topic in Manufacturers & Dealers
Nice little cart Rob! Love it! -
-
In my opinion you would need more than just a soldering iron and some basic skills to execute this cable properly! First of all you have about $120-$150 in parts, depending on where you get them. Time needed to source the parts, minimum 2 hours if you know where to go. Second, there are number of tools you will need to pull this off. Some you might have, some you probably will not. There are also various supplies you will need, such as different sizes heat shrink, cables sleeving etc. Now! You have 13 connectors (if you want a quick connect on both sides) 4 of those are multi pin (7 contacts, possibly . You have at least an hour or two of cable preparation, measuring, cutting, stripping and tinning. Once that's completed, all that is left to do is solder the connectors, another hour or two, depending on your level of expertise. When you add it all up it turns out to be something like 6 hours of work + $150 in parts, that is best case scenario, IF everything goes as planned. You would have to be a very good cable maker to pull it off for the same price that you can get it at Trew, unless you are making a batch of 100. All I'm saying is that even though the price feels "pretty ridiculous" to you, it's actually pretty fair. Now! I am all for sound guys making our own cables, repairing our gear and developing our skills. Great amounts of pleasure and pride comes from that, we all love doing it for those reasons, however, the above statement sounds a lot like something I would hear from a producer or a director who says: We don't need a sound guy, we have an onboard mic! With a furry!
-
Thanks Chris!
-
Where can we get these Chris? I would like to try them out! That is a terrible connector. I don't understand how it found its way into the professional world!
-
Great work thope!
-
Thanks osa! They are available for sale!
-
Hi Viet, I make these cables. Send me an email if you are interested.
-
Another TA5 low profile! Not right angle this time
100sideprojects replied to 100sideprojects's topic in Do It Yourself
Thank you Jeff! -
Cables for SRs- Uni/Superslot connectors.
100sideprojects replied to johngooch's topic in Do It Yourself
That's a pretty sweet build Tom. Nice work! -
I made the boxes Daniel. Hi Larry, there is no balun. It's just the shield going to one arm and the core going to the other. I've made dipoles before with just a coax cable and they seem to work well. This time i decided to put them in a box and mount them on the side of my bag.
-
-
Another TA5 low profile! Not right angle this time
100sideprojects replied to 100sideprojects's topic in Do It Yourself
Here is a short video showing how the connector works!My Movie (1).mp4 -
That s a very nice buid Thope. I have been thinking about building a cart for myself as well. The information has been useful.