Jordan Sy

Members
  • Content count

    99
  • Joined

  • Last visited

About Jordan Sy

  • Rank
    Hero Member

Profile Information

  • Location
    vancouver bc
  • About
    Film, Doc

Recent Profile Visitors

1,328 profile views
  1. There are off brand (YPA) adapters for quite cheap on eBay. They work fine. But I would still recommend the dpa ones just for the ease of mind. They would work in the mean time though.
  2. They don't come with the cases anymore. I put mine in the countryman cases they give. Fits them well
  3. Hmm I would re check the ta5 termination. I have the high sense slims as well. Though hotter than a cos-11 they still sit around 18-20 for normal dialogue. Using mine with microdot and ta5 adapter
  4. Always recommend the Tony Smyles Comm-Biner. Interfaces between mix and comms. http://www.pro-sound.com/p/smyles-comm-biner-walkie-stereo-audio-interface.html
  5. Have been using notability with great success.
  6. Check out tony smyles comm-biner. http://www.pro-sound.com/p/smyles-comm-biner-walkie-stereo-audio-interface.html mixes in with your cans. I mix the walkie to one ear and then set it just low enough that I can hear if someone says sound or my name over the walkie
  7. Maybe a built in app to record the audio. I know there is a few that records phone conversations
  8. Agreed if in studio, not much of a point in going wireless.
  9. I disagree, mixing dialogue maybe fine but trying to track guitar or vocals with that much of a delay can really throw you off
  10. Having used the sennheiser rs160 before I would say it's not practical for our purpose. There is a small delay but it is enough to annoy you between the noise from outside and the audio from the hp. Sound quality as well is not what we need it for, these transfer audio at about 44.1khz 24 bit and sound compressed when critical listening. Can't beat a wired set of cans. Comfort is fine but overall build quality isn't as good as our standards 7506, hd25, m50 etc.
  11. Awesome! I have the harness but will it work with other bags?
  12. Are the features of movie slate any better/detailed over sound report writer app?
  13. Did the battery die as soon as you plugged it in or after switching on the 664 to ext.? This is what I must do with my gmp batts. Have everything in the bag off, plug in the np. Switch the 664 to int batt let it start up and then switch to ext. after that turn on everything else that's plugged in. Someone explained to me before why it automatically fails when switched directly to ext but I now forget the reason. ..get what you pay for Though it's a weird tweak my 3 4yr old gmp np1s are still running fine and power my 664 411s SRB and ifb just fine.
  14. Nice! How did you install the shelving and drawer?
  15. Looking at my digi 02 in front me now when set to stand alone mode it says 44.1khz in the sample rate display without any way to change it. "Digital Mixer Sample Rate In Stand-alone mode, Digi 002 functions as a digital mixer with a nominal sample rate of 44.1 kHz. Analog input signals are converted to digital signals for processing and mixing. In Stand-alone mode, Digi 002 supports digital inputs at sample rates up to 48 kHz." - from the manual So I'm assuming it can accept 48k through digital input but will still get converted down to 44.1. If you are using any PT after PT8 you can use any other digital board now and not confined to DIGi/AVID consoles. There are many more digital boards that will work with PT with better sounding preamps for loc work as well that I would recommend over the digi 02..even with the BL preamp mods the preamps were missing lots.