Jump to content

alidav

Members
  • Posts

    154
  • Joined

  • Last visited

Everything posted by alidav

  1. I have seen this company Leicozic (https://www.aliexpress.com/item/32961947715.html?spm=a2g0o.detail.1000060.1.5a0435e3w4c4i2&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.146401.0&scm_id=1007.13339.146401.0&scm-url=1007.13339.146401.0&pvid=fd14c1ac-f7b3-485b-9e09-7785935d7987) that has many products as iem receivers compatible with sennheisers and rf distributors, has anyone tested their antenna? they are all active, can be used as passive without any DC applyied to them? how do they look constructively
  2. how s your experience with that, does it work properly with sennheiser systems? i need some more ifb receiver, actually i have a system with 3 ex 1038 Sennheiser in E RANGE with a g2 transmitter, and need some more receivers, seems that its impossible to find in the e range (826- 861).
  3. I was meaning issue about receiving perfomance.
  4. we have to deal with a cart not optimized with receivers, can many pairs of receiving antennas of different systems,( 2 boosted antenna on wisycom, 2 dipole self made antennas on a lectrosonics venue, others pairs of antenna of several other lectros in other blocks) can in some way affect to each other performance or introduce any other issues? when using many transmitters, we have to deal severely with intermodulation error, but there is some technical issue coming out on receivers? thank you
  5. hi a company i work with sometimes, has a sl6 with 4 wisicom, and has 4 sanken cos 11 wired for lectros servo biased. they don t want to change connector and just want to build an adapter, what is the correct wiring for this? would work also for older lectros um 400?
  6. Is possible to combine 2 antennas to a sl6 with wysicoms and a venue1? The venue (blk 28 -29) has a thought output and I need to know if it is freq wide range or it is just related to the operational blocks
  7. my walk test failt 2 times, it was worse than the stock antenna, can depend from connector quality and cable to connect to the board?
  8. I used a 50 OHM antenna tv cable, in a case i used the same cable soldiered directly on the Sennheiser g2 motherboard, to replace the broken stock antenna.
  9. If using that dipole DIY antenna on a UCR 411 receiver, I need to replace both the stock antennas to get better results? If using that dipole DIY antenna on a UCR 411 receiver, I need to replace both the stock antennas to get better results?
  10. sorry to resume this conversation after many weeks, do you think this can accomplish the goal? to put an sma connector on sennheisers ?https://it.aliexpress.com/item/5pcs-SMA-Connector-Cable-Female-to-uFL-u-FL-IPX-IPEX-RF-Or-NO-Connector-Coax/32909354468.html?spm=a2g0y.10010108.1000016.1.35a339ebSPmqgI&isOrigTitle=true
  11. I have a question about length, I have several Sennheiser g series, all in b range and the antenna length is 11 cm ( 4,33 inches), since the range is 626 - 661, considering the formula 300,000/ freq/4 is around 11 cm all seems to be coherent, if considering this document https://www.lectrosonics.com/US/phocadownload/ammkit_td.pdf in the same frequency range the length is quite shorter. lectros seems to be shorter then sennheisers.
  12. QUANT WHAT IS THIS connector, has it been crimped?
  13. what sma connectors have you used, there are many quality and prices around, sold online from China like 3 $ for 10 pieces and there also pieces of 5 $ for each.
  14. I own a Sennheiser skp500 g2, actually it is being repaired since 48 v phantom is not working, and I am considering an upgrade with it, my question is, does make sense an upgrade to a skp 2000 ( to get also a 100 mW ) considering that I have already a tx/rx 2000 system? I would buy the plug on in the same frequency range to use with the receiver I already have, the other option is to forget the Sennheiser and sell the actual senheiser plug on and go on a used lectro like uh 400 to use with some ucr 411 that I have also.
  15. I am aware of the sacrilegious question, but we dont have other choise, we need to shoot in an operating room, and no other person but the video operator is allowed, no equipment place here and there, only on man with dslr on a jimbal. we need to capture a decent dialogue of doctors operating a 2 meters. any suggestion for a good mic for a dslr.?
  16. I have traveled to Beirut from Naples, we toke 4 flights for the round trip, everything was smooth probably because at our destination we found UN officers (we were shooting for them) and military police waiting for us and helping us to arrange all the visas procedures when arriving and leaving. the only eye control we had was in Rome on the hand luggage and they checked the lithium batteries, I can say that I had one 95Wh, one 160 Wh, 1 phone power bank, some AA batteries and a sound devices 664 in the hand luggage and passed through, all the rest: petrol bag, harness, leatherman, cables, wireless mic, boom, windshields, and accessories was in a pelicase checked in. the only issue was about the air company that stole us 230€ to take on board an extra small baggage.
  17. we had the proper cable bought from the production, lucky us.
  18. we have 2 sd 668 -664 to sync to each other and both have both a lemo - bnc cable, do you think if joining them via a BNC/BNC female adapter, it going to work?
  19. Pat there is a none issue for gear described, for the 65 wh battery no problem at all. The regulation described on any company website states that over the 160 wh are not allowed but none I know many people that have totally been ignored with 180 wh batteries. 2) when you travel with your personal used gear why you should get through the custom. I have traveled fro EU to us in the past with gear, with no issue at all, have ordered some mic at BH photo and had it delivered from a friend traveling and not a problem also
×
×
  • Create New...