David Machado

Winter is Coming!!! (Galicia - Spain) "O Peregrino: The Life Story of Paulo Coelho" (Brazilian Film) Boom Operator: Daniel Fernández

Perfect Is a very good reason, and the first photo is nice!!!

Hello. My opinion (excuse my bad english). Interior and exterior the sound yes is diferent, very different, more that the wind protection HF difference. If you don´t use zeppelin your boom is more light and more small, also I think that use a same mic in interior and exterior only in special situations is a good idea. But, perhaps the photo locations had open window, or other problems thai I don´t know. Or that say carbonhobbit or Low budget = Only one mic, one Zeppelin, one... Is no easy.

Very thanks, Billy. Yesterday I use 12v and it´s Ok, work perfect. First I open the injector, and it´s very simple circuit, one diode, two transistors, two leds, three condensers and eight resistors. I checked the specification of all components, and 12 volts is not a problem for it, and the amp specification is 9-12v +/- 1v. The system works perfect (IFB100 + L-Com Amp + SCR12 Antenna), but I can´t use the same battery for L-Com Amp and my analog material (SQN Mixer / Audio Ltd Wireless) because it inject noise of 2.4 modulation on my audio signal. The other problem is that less 10 meters, I have this noise modulatión on my audiolimited Tx2040 wireless... But for this distance I don´t need 1W Output. Thanks!!!

Thanks, I understand "it can do 9v – 12v just fine", but I read a Billy Sarokin´s post that say: "Just make sure it comes with a 12v DC injector. Mine came with a DC injector, part # XA- BT2406-20NF which was 9v and is now sitting dead as a door knob on my desk" This is the same injector that I have, and L-Com say that is correct and can do 9v-12v. I´m confused, perhaps is another version. Someone work with 12v and DC Injector XA- BT2406-20NF? Thanks

Hello my name is David, and it is my first post. (Sorry for my bad english) I have a question about L-COM DC injector BT2406-20NF for HA2401G-1000 (I have a IFB100 system with ERX1TC). I read on post that DC injector BT2406-20NF is only for 9V, I ordered 12V but I seller send me a BT2406-20NF, a write to L-COM: "I have a "1 Watt 2.4 GHz 802.11b Outdoor WiFi Amplifier" (HA2401G-1000), with a "DC Power Injector N Female 2400-2500 MHz Nylon Case" (BT2406-20NF). On specification sheet I read that it can powered with 9-12v, but the AC-DC power accesory is 9V. Can I power the antenna with 12v? or BT2406-20NF is only for 9V." And they answer: Mr. Machado Thank you for your interest in our company. In reference to the part you mentioned, you are correct, it can do 9v – 12v just fine. If you have any more issues, please don’t hesitate to ask. Can you help me for I´m sure to connect to 12v? Thanks.