tong

it's a nice bag to have for the lightweight nature. but same problem as most bags for me, troubleshooting of inputs 1-6 is a problem I foresee since the Nomad has its connectors buried at the bottom. The AO1.5x is a tight fitting for 2 rx and 4 tx in the main compartment. I will b able to fit in another rx in that empty slot but the tx will hv to be stored somewhere else in the bag. Sent from my iPhone using Tapatalk

how are you keeping the excess mic cables tidy on the wisycom transmitter when mic'ing up the talents? i used a rubber band to secure the excess cables but it is messy when i need to excess to the settings of the transmitter or change batteries. It used to work well on lectros..

I think I'm done for awhile.. Zaxcom 12 with 4 channel wisycom wireless set , ERX for IFB. Sent from my iPhone using Tapatalk

James, XN3 now doing a good deal for AO bags, check it out! Sent from my iPhone using Tapatalk

version 1, still working towards a neater and tidier setup. The AO1.5x still seems a little tight with the Nomad.. Perhaps a AO-2 will be more roomy? Sent from my iPhone using Tapatalk

i used to use QC frm Ktek. Failed on me couple of times, it depends on a nut to secure the base and it easily comes loose every few months. Takes a coin and a Gerber to release the nut from the base.. ever since i changed to Ambient, Base never leaves the boom pole tip.

I've been oggling at pictures on the internet but I can't get the information that i need. Does the ktek klassic's Bottom XLR exit and right angle XLR exit share the same TA3M connection internally, would i have to change the cable kit if i were to decide to switch my pole to a bottom XLR configuration?

One of my Sennheiser G2 EK500-C #501188 has been misplaced, if anyone see it floating around on For Sale forums or Ebay, please kindly let me know asap!

even if signal is not distorted in the 32-bit recording because of Neverclip, when i mirror it to 24-bit audio there is a chance it may distort or clip bcos of the conversion?

Excellent craft Pascal! You brought DIY to a whole new level!

Hi, This is pretty urgent. just did an firmware update on the VR FIeld Narrow band unit and it fail halfway. now the unit refuses to power up. any way to do a master reset without sending it back to the mothership? have a project coming up very soon that needs to use it.

Is there any Timecode jam to the camera?

Meet the brothers... i'm all set for this career for the next decade.

Zack, so the acl-202 (not CT) doesnt't?

Hi all, I was browsing on eBay and spotted some ambient lockits acl202 on sale and am interested. However after researching I realize there are different models with the same number , acl202 and acl202ct. The acl202 doesn't seem to support hd tri level sync, I like to know if my findings are true. I would prefer to have a lock it box that works with any modern cameras just in case one day I require that specification.. Thanks!