Jump to content

Patrick Tresch

Members
  • Posts

    477
  • Joined

  • Last visited

  • Days Won

    8

Everything posted by Patrick Tresch

  1. Jacques told me that he didn't want to put a antenna splitter as it's allways a compromise for best signal unless you use a finn. He also opted not to use the superslot system mainly for size and weight reasons. They worked on the mechanics to make it user friendly.
  2. Could you find a Sonosax M2D2 in your region and try it out?
  3. New firmware 1.5 is out. Some nice UI changes and some fixes. Find it under Firmware https://www.sonosax.ch/product/sx-m2d2/
  4. From Sononews of Sonosax : https://www.sonosax.ch/sononews-december-2020/#repairs "For the MINIR and SX-R4, maintenance is ensured but we recommend replacing the hard drive with an SSD."
  5. Is that right? I had mine stolen 2 years ago so I can't remember this but I was pretty shure it was able to record more tracks on the CF. I had mine also converted to SSD . I miss my beloved tiny R4 (I have his "big" brother R4+ now).
  6. You can test my SX-R4+ i'll give it to you for a week. I'm in Lausanne, and send my greatings to Masaki. Patrick
  7. I've used the Leo for on camera with the CCM41/8, it works really well but it's not 100% efficient in windy conditions as the wind often enters the back of the windshield/fur. But fot the 95% of the time it's really good. Now the mics/preamp are so sensitive to noise that you have to be carefull with handling noise (and camera noise if there are). Wich camera configuration do you plan to use? In this setup I put the sound below to change the center of gravity and to be in a smaller foot print. I changed the phase of the CCM8 to correct the MS decoding in the right LR stereo.
  8. Sonosax SX-R4+ has been designed with the weight (850 g 1.9 lbs), size (200 x 50 x 144.5 mm 7.87 x 1.96 x 5.7 ‘’), and power (6W if all inputs are enabled) in mind for docu work. It's so good that it became even a good choice for classical music recordings! I love what engeneering has been put in this little machine. With the Wysicom 4 channel reciever and the upcoming RX+ module it will be really efficient, but I don't know if the module will be ready for summer...
  9. How good has it to be? https://www.sonosax.ch/product/sx-vt/ 😉
  10. You would get the preamp, for the recorder you need another device like the Lectrosonics SPDR Or buy a second hand Sonosax Minir.
  11. I have the leo but I got some troubles in windy conditions. The fur doens't cover the back enough.
  12. The Sound Summit october is announced https://thesoundsummit.org/
  13. Hello, I broke the 3rd of 5 extentions of my boom pole. It's a K-tek 102. The carbon fiber broke at the base of the extention and is useless about 4 inch. Is it possible to change the part? I yet didn't find any replacement part. Or can I cut the broken part knowing it's carbon fiber? Any input would be appreciated. Thanks Patrick
  14. New firmware V1.2 https://www.sonosax.ch/product/sx-m2d2/
  15. Noooo... it was : http://www.emil-berliner-studios.com/en/gesichter.html "Direct-to-disk vinyl, recording of Bamberger Philharmoniker We mixed with your desk SONOSAX SX-ST four microphones with 6 channels: two Sennheiser MKH 80 Twin (as main microphones with two capsules each) and two Sennheiser MKH 30. Rainer Maillard, Emil berliner studios" I love the team work needed to achieve this. Pat
  16. M2d2 on the New Red Komodo By Phil Holland https://www.instagram.com/p/CCDDGFqHAt9/
  17. Thanks a lot for your help. FYI Bubblebee can make one for this mike they told me. See you. Patrick
  18. Thanks for your help. Could you measure the length of the interference tube for me? I would like to try the Pearl.MSH 10 with a Bublebee windkiller.
  19. Interesting. What winshield and suspension do you use with this mic?
  20. But FD looks more modular.
  21. They could add a spigot holder. 😉
  22. I love the vibe of this company.
  23. Hello, This CMS-50 is a cardio MS right? Anybody knows of a short shotgun mic in MS config "close" to the size of this CMS-50? I was thinking of buying the Minicmit and add my CCM8 but I don't find any small windshield configuration for it. I usually use the CCM41 and CCM8 in a LEO MS on my camera but would love to have something more directional. Thanks for any input. Patrick
  24. May 1 session https://www.youtube.com/watch?v=E1iUbxfJmQQ
×
×
  • Create New...