Jump to content

cbsixty

Members
  • Content count

    25
  • Joined

  • Last visited

About cbsixty

  • Rank
    Member

Profile Information

  • Location
    Hamburg / Germany
  • Interested in Sound for Picture
    Yes
  • About
    ENG / Image / Corporate

Recent Profile Visitors

1,182 profile views
  1. DPA 4063 loud pops

    I actually had that problem a few times and everytime - even if the connection between Microdot and adapter seemed to be tight and perfectly fitting - it was just not connected right. If you have really sorted out that, it should be a simple cable-defect near the Microdot. Had that, too, and it's a quick repair.
  2. DPA 4060 wireless

    If you are not quite shure how often you are going to use your DPAs wirelessly, it is perhaps just easier for the moment to get your rental wireless including suitable lavs. So you don't have to spend that much for some adapters, that just get dusty after the shoot. If you WANT to buy the right adapters, I absolutely recommend the ones from DPA. They are very high quality built and it could happen that you have enough struggle with a lav itself (i.e. if you're hiding it), so a well built adapter would be one less thing to worry about.
  3. Netflix teaser "Dark" first German production

    Looks and sounds exciting!
  4. What is the sound mixers responsibilities?

    I actually never had a DP / AC setting up TC or scratch audio right away. If I handed that stuff to them, I always got it back with the question to do it myself. That's okay for me, as I had confident ACs in the past who claimed to have set up timecode, but in the end only plugged in that lemo... Usually I just tell them I what gear I need on the camera. If they refuse, I report that to production and let them handle it. If they're fine with it, I tell them I definetly need 3-5 minutes for setting it up and ask them to notify me as soon as there's a time slot for that. Works well most of the time. On one long job the 2nd AC asked me (while setting up TC on day 2) to explain that to him, for that he can take care of it in the future. Nice! Regarding TC-Slates: I bring them, set them up and hand them to the cam dep. If they get damaged, it's a production issue. But that never happened so far, as on the shoots I used TC slates the ACs were all professional enough to treat them well. Pushing back on rude camera guys only creates more bad atmosphere. As Philip said: staying calm works best. I had one loooong shoot to lern that lesson.
  5. Curious to get in there, but tickets usually sell out within minutes. I ought to shoot there during the grand opening, but already had another job. Too bad...
  6. Alternative lav clip for DPA 4060's?

    The DPA Clips you use are a pain to work with. I got a few and most of them are just too stiff and fiddly, while others (e.g. the white ones) are not that stiff. I like the Sennheiser clips ( http://de-de.sennheiser.com/zubehoer--klammer ). They're easy to use and you can rotate the lav at 90 degree. Only downside: the tiny clip that is then mounted in the clamp is designed for the thicker cable of an MKE2, so you'd have to thicken the DPA cable with a bit of tape where the clip sits. But apart from that it's a good and quick-to-use alternative.
  7. DPA 4060 died.

    I took it to Zeigermann Audio in Hamburg as I bought it from them and they also do repairs like replacing MicroDot connectors. They then sent it to Denmark, as they couldn't detect the defect.
  8. DPA 4060 died.

    Holy... Yes, lucky me. I also had two DPAs break next to the capsule. Did not test the Slim yet, but will do next week.
  9. DPA 4060 died.

    Just a quick update: The 4060 went to DPA, they detected some sort of defect inside the connector. It's back now, connector has been replaced under warranty, which I find to be great service.
  10. DPA 4060 died.

    Thank you Constantin, I'll definitely try that!
  11. SD 633 WAV File Shorter Than Expected ... Recovery?

    I read the whole topic now and must say: I didn't really understand this infinity-thing. Could you explain it again?
  12. DPA 4060 died.

    Hi, as title says, I have a DPA 4060 that suddenly died and am curious if anyone has an idea what could have happend. Bought it in july and used it on just about 10 days. It has no kinks or whatsoever, treated more than good, never fell down. The last time it's been in use was two weeks ago with zero issues, it then lived in its box until yesterday. I took it out on a shoot and nothing came out of it but silence. No cable contact when pulling or bending the cable (softly), so obviously not a broken cable. Local dealer tested and declared it "dead, but cable not broken". Tx and DPA adapter problem sorted out, as my other 4060s work fine. I'll contact DPA when I get home from lovely, rainy Malmö, but perhaps somebody on this board has an idea what could have happened. thanks so far, Christoph Have to add: no moisture on last shoot, we've been in a studio.
  13. Simple Mac video editing....Resolve?

    There has been a light version of Premiere, quite cheap (like 100 Euros), called "Premiere Elements". Don't know, if it's still available, but it's been okay for simple editing purposes.
  14. Renting out / Renting in extra gear

    I do rent out my ENG Kit - which is 442, 416, Senny G3s and a DR60 - to few folks from time to time, provided that I worked with them before and therefore know them personally and the way they treat gear. However, my main setup, consisting of 633 and Wisycoms, stays with me. If I need extra stuff - mostly additional ifb receivers or a stereo setup - I get it from the local rental house or let production get it from them - as they like.
  15. https://www.facebook.com/SchoepsMics/posts/1463691233660005 "Dear friends, please be aware that another shipment from us to the US got "lost" by the carrier. If you get offered inexpensive microphones, be aware that they could be stolen, so make sure to check the serial number first!" Serial Numbers: https://m.facebook.com/notes/schoeps-mikrofone/missing-schoeps-microphone-shipment-2016-10-18/1463653680330427/
×