Search the Community
Showing results for tags 'SR'.
Found 4 results
I'm planning a Lectro wireless kit for use in Australia and I'm trying to work out what blocks to buy. My planned setup is talent SMQV (max 6) going to SR receivers in the bag, and then two SMQV for camera hop going to another SR on camera. The setup will be based in Canberra, but used Australia wide. So far I'm thinking about block 24 for talent and block 26 for hops, and maybe IFB on block 21. Anyone with Australia Lectro experience let me know what you think. Thanks! Chris
MattinSTL posted a topic in EquipmentOkay... my eyes (and brain) are glazing over. I just read an old thread where a member says he wired 40 people in ONE block! Wow... maybe I'm over-thinking my new bag(s). The gist is... I have a little trepidation about putting so much into SRb... with the LR/LT now available (only because of the difference in 1 block vs. 3 blocks)... HOWEVER... I still think the SRb is the defacto bag choice (or Wisy, etc.)... basically, that form-factor wins IMO... and, I fully understand Rado's obsession with weight-reduction. Anyway... so... choosing blocks! From what I've read, and experienced, here in STL... 19 is a good choice here. The common logic I get over and over from other soundies is go as low as you can on new purchases. 19 has been working well in STL... so... 2 SRb down in 19 (Thank you DVestore, for the great service)... and 1x 21 for hops to news cams. With the SL6 eminent... I'll definitely have 3 in there... and probably stack a couple more on top in a dashboard. These 5 SRb will alternate between the big reality 688 rig... and 2 at a time will go down into the little 633 (with dashboard) news/efp/small-gig-rig. Right now I'm trying to decide between 3x 19, and 2x 470... or 2x 19 and 3x 470... while still keeping them a full block away from the hops on 21. Thoughts so far? From what I've read on the archives here... and on the Lectro pages I think I'm heading in a solid direction. I feel like Lectro should have a clear, "pre-sales page" which sort of insures these choices, but so far I can't find it, if it exists, which is why I'm posting here. I've also got some G3 units that I use as both DSLR (or other economy hops)... and IFB. Bottom line on that is people aren't getting SRb hops if they're not paying for it, or unless the overall gig pays so well that it's covered... i.e. magazine shows and/or other high-end production... THAT'S when the G3 is handy. They're good enough for scratch hops (too good almost)... and pretty good at IFB... all from a single TX. My G3 TX is "A"... so here is the kit(s): Talent: 4x470 (or 6x470) 473.300 - 485.700 (470 can be tuned into block 19 manually, almost half-way at 495.500... does this increase the value of 470 enough to get 2 extra 470 and 2 less 19s?) 6x19 (or 4 x 19) 486.900 - 511.100 Cheap HOP and IFB Block "A" 515.000 - 558.000 SRb Hops Block 21 538.100 - 562.500 So... if you care to comment. I feel like this is a pretty good plan. Which, based on experience and reading Lectro charts for here, and other cities... should be good, but I'm wondering if it's a poor choice to have 10 wires (and likely 12 eventually) in only two blocks, 470-19... or if I'm right on the money? Needless to say... some major burning on the CC... I was hoping to find something on Lectro's site to reassure my plan... and from there, the archives here. My current bag is a hodge-podge of blocks... and models, 411, 211s, 210d, and 201s in blocks 21, 22, 24, and 25. I've done well with this kit, but there are days where it makes me work harder than I think I should have to (getting all the blocks to play nice through the numerous talent, IFB, and hop TX. I'm really hoping that my current plan will streamline all of this... and take some of the coordination stress out of reality gigs. Typical max on reality (for me anyway) is 8 wires... but if they're willing to pay for each wire after 2 or 4... I'm happy to load 'em up to the max ISO channels, but I would like to make it easier on myself than it has been.
The DuoPack is now in stock at Lectro. Accepts SR/SR5P Series slot receivers Dual 3.7V Li-Poly 3000mAh batteries Up to 17 hours operating time per charge Built-in recharging circuitry Dual, balanced audio outputs The DUOPACK adds a rechargeable battery pack to an SR Series receiver, allowing it to operate as a stand-alone device, further expanding the versatility of this product family. Two lithium-polymer flat battery packs, one on each side of the assembly, provide enough capacity to operate the receiver for up to 17 hours per charge. The control and connector panel includes audio and power connectors, an operating mode switch and battery charging circuitry. The unit can be operated from the internal batteries with an external power supply connected, or from external DC only. http://www.lectrosonics.com/US/Wireless-IFB/product/482-duopack.html Best Regards, Larry Fisher Lectrosonics
Ambient Insider's tips Recent requests from the USA and China showed that although frequently used in Europe some of our products and small workflow helpers are rather unknown to the majority of our community. Thus we would like to take the opportunity and introduce you to our "insider's tips" which have been on the market already for quite some time. VSLOT As prosumer as well as digital cinema cameras nowadays offer at least broadcast compatible video quality they mostly cut back professional audio features and inputs. With the VSLOT you can add a professional stereo slot-in receiver (of course also mono) to all cameras or rigs with a V-Mount battery. This way professional slot-in receiver from Lectrosonics, Sony, Audio Limited, Sennheiser, etc. can now be used on smaller HD cams or cinema cams, delivering an adequate audio to the good video quality. The receiver uses the power from the V-Mount battery and of course loops it through to the camera. The cables are available in different lengths to provide a slim camera rig without dangling cables while our included 20cm stereo cable works for most setups. It powers the receiver through the standard Unislot 25-pin DSUB connector... ...and delivers up to two channels on a 5-pin TA connector UMP II and QWB wireless boom solution The Quickpole Wireless Boom (QWB) is a handmade extension made out of carbon fiber and aluminum to attach a body pack wireless and our UMPII power supply to a boom tip. Of course it doesn’t matter whether it’s an Ambient pole or not as the stainless steel threads are standard 3/8”. It adds 25cm length to you boom with only 90g additional weight. The idea behind it is that plug-on transmitters often offer a worse range since they are using the Mic body as antenna. Now, of course the range you get from a plug-on is strongly depending how well your Mic body makes contact with the XLR or the plug-on. Thus sound mixers asked us a long time ago to develop something so they could use there rock solid belt packs also for their boom microphones. The UMP II, our latest generation, is lighter and smaller than our first box and can provide 48 and 12V Phantom as well as T-Power for older Mics. Dimensions (WHD): 57 x 92 x 18 mm Weight (unit only): 100 g It can power even the hungriest microphones, e.g. Schoeps CMIT for days from only two AA batteries. Of course one TA3f to XLR3 cable is included as well as a TA3f cable with one open end to solder your wireless connector to it. We took great care that our circuitry does not affect the audio at all. As our American customers prefer to use an internal cabled boom with a microphone power supply and a wireless transmitter on their belt we added a belt clip to the UMP II. In Europe sound mixers prefer to use the transmitter and Power source on their boom tip. Pros and Cons: The American way of course provides a lighter boom and easier access to the transmitter and Power distribution BUT Internal cable can rattle and the body pack on your belt has less range. The European way is a compact sized setup you also can use on a stand increases your boom lengths and offers the best wireless range. while of course the boom gets heavier. More Insider's tips will follow if you like Best Regards Timo P.S. we also offer an active Phantom Power to T-power cable called PTM