Search the Community
Showing results for tags 'b6'.
Found 3 results
Hey all, just wanted to let you know my button-down lav mounts are now available at Pro Sound. You can get them in black or white for the COS-11, DPA 4060 series, or B6. http://www.pro-sound.com/p/SABEMICMOUNT.html I made these to deal with a really awful work shirt on a show I've been on this summer. Starchy, crackly and dense, it responded weakly to some of my favorite tricks but was still a pain. I had the idea to brute-force a solution that would give the mic some clearance and also create a dead space in the shirt, movement-wise. I tried a couple of different materials and this is the result. The mounts are very flexible, vibration-absorbent, and strong - they hold up to a lot of abuse. I use the COS-11 version every day on this show and it's been a lifesaver. It doesn't prevent truly awful things like arm-crossing, but normal movement is now totally acceptable in my case. I recommend using it vertically, between the shirt buttons near the solar plexus, so the mic is barely hidden. You can use 1/2" Topstick, or Joe's Sticky Stuff if you need extra isolation. The mic comes out at an angle because I like the way it sounds better than purely horizontal. Any questions please ask! Thanks, Abe
Good News Everyone, A while back I was minding spacing out during a boring interview. There was no cell service and no WiFi so I was forced to use my imagination like a chump. I had just wrapped up work on the SNL documentary "Live From New York" and I was thinking about how hard a time I had micing up all those interviews. We had a whole string of famous and busy people. Every moment I spent wiring talent was time spent not interviewing. With all eyes on me, I was often forced to do a pretty shitty job - Praise Be to the Boom! Through the course of my mental meanderings I had a flash of insight. I am a big fan of hiding a b6 in knot of a tie - but I often had trouble getting the capsule through the knot quickly and without loosening the tie. How cool it would be if there was a way for the B6 to be a little more rigid and poseable near the capsule? Bam! - Shrink tube a piece of annealed wire near the capsule and you have your self a flexible mic arm that you can make go exactly where you want. Chris over at Countryman made me a prototype and I have been testing it. And it is amazing. Aside from tie knots is works great micing up people in all sorts of situations. The flexible arm allows you to mic people faster with less tape and moleskin. You can also flex the capsule away from trouble spots quickly and easily by just bending the wire a little. And even with the annealed wire and shrink tube it is still a super small. It is my hope to replace most of my B6's with this enhancement. Thanks so much to Chris Countryman for being so cool 😎.
Like lots of recordists, I struggle when micing up people wearing shirts. Avoiding scratching and rustling can be really difficult. I'm a big fan of the "hide in plain sight" method using a Countryman B6 through a button hole, but find the sound of the mic itself a bit hit and miss. I've been trying to figure out a way to do the same with a Cos11. Simply poking it straight up doesn't work too well and the angle created makes the rear of the head stick out into the chest. I tried using a cut up piece of a right angled straw today and it worked surprisingly well. Seems to create a bit of a peak in the upper-mid frequencies but nothing too drastic. It's worth it to negate the scratching anyway. Best thing is the mic head stays straight up and can be taped unobtrusively on to the inside of the shirt using moleskin or similar. You can even poke some bits of fabric into the front of the straw for some wind protection.