Search the Community
Showing results for tags 'hawkwoods'.
-
Hi everyone, We have collaborated with Hawkwoods to produce The Power Distribution Rack aimed at primarily soundies. It has a 4 pin XLR input socket, four 4 pin XLR 12v outputs (with a combined rating of 5A), and six unregulated 4 pin XLR outputs. Two USB connectors are included for powering/charging compatible devices with a combined rating of 2A. The LED screen displays battery voltage remaining in red and total current being drawn in blue. Please see the pictures below and let us know what you think. Cheers, Nathan.
- 22 replies
-
- power
- wendys broadcast services
-
(and 3 more)
Tagged with:
-
So I recently received my Nomad and based on the recommendations of a few people on this forum, decided to go with the Hawkwoods DVSQN4S to power my bag. I tested it out on a shoot over the weekend and I am not getting the run time I was expecting and worse, I lost power during a take twice at a voltage on the battery meter that I shouldn't have. I will readily admit that I am very green when it comes to battery chemistry and power distribution so, I don't know if I'm missing something obvious, but this is my understanding so far of my setup: The Sony batteries I'm using are 7.2V and 7800mAh so I should be getting 14.4V Nomad operates between 10 -18VDC Hawkwoods DVSQN4S has 12V regulated output Nomad displayed around 16.4V with fresh batts and would kick off around 14V on the meter. I was only powering the Nomad. Any ideas what is happening? -Bradley