Search the Community
Showing results for tags 'microdot'.
Found 2 results
Hi All, Just added my first Microdot connector Lav to my set-up - a DPA 4061. Now researching microdot adapters and am comparing the DPA adapters to the AKG versions. I am needing to use the 4061 with Sennheiser G3 wireless, at least for the next while. Are these Microdot adapters universal or interchangeable? Here's the AKG version : https://www.bhphotovideo.com/c/product/1192234-REG/akg_6500h00310_mda3_sen2_microlite_microphone.html versus the DPA version: https://www.bhphotovideo.com/c/product/390976-REG/DPA_Microphones_DAD6034_DAD6034_MicroDot_to_Locking.html Would there be any technical and/or quality difference between the 2 brands? I also see an "off shore" brand available elsewhere but a little hesitant about that, unless anyone has a favourable reliability rating for these. Lastly, any issues with DPA 4061 with XLR microdot adapter into Sound Devices 302? How is mic safely drawing power from 302? Thanks for sharing your expertise and experiences - very kind. Best Regards, Dave Mc.
Hi, Does anyone know if it's possible to get hold of DPA microdot connectors? And if so, would it be possible to wire them to a Sanken Cos 11? I'd like to have a little flexibility with my lav mics. I have used DPA mics, although it was a good few years ago. I seem to remember the microdot connectors being comparable to SMA connectors, i.e. just a screw in pin and screen connection. My memory could be failing me here but if that's right then how would the Sanken's three wires connect into the microdot? I've read a little about a similar connector that Rode are now using but as far as I know they don't do a 6 pin Lemo connector, which I need to fit to my Audio Ltd tx. Any ideas?