Search the Community
Showing results for tags 'mount'.
Found 3 results
I'm looking to find a means to mount my Zaxcom RX900 camera hop onto an Amira. I know there is a mount coming out to attach a slot in RX (SRb etc) to the battery plate, but nothing as far as I know for the Zaxcom. What I'm ideally looking for is to mount a plate via the 3 screw holes just above the XLR inputs (see pic). I believe Hawk Woods have made custom mounts in the UK, but I'm LA based and ideally need something by the end of the week. I spoke to Mike at BEC this morning and he has some great ideas for an "L" shaped plate that will attach to the standard BEC zaxcom box, and that would be an ideal solution, but it's going to take him 3 weeks. I already have saddle bags, cold shoe mounts, etc, etc, but it'd be great to find a neater solution. No luck with the usual suspects (Trew, Location, etc) here, so any ideas would be welcome!!
Greetings 744T afficianados, SD experts, and audio experts in general, I recorded a boom and a lav the other day on a job. It sat on the cart all day. I usually record to the INHDD and CF card. All day, it showed the usual available space to the INHDD, and nothing but dashes for the CF card, like it wasn't there. (oh boy). Attempting transfer of the CF files to the Mac, no files showed on the CF card, as I'd feared. The files show up and playback fine on the 744T INHDD. But as far as the CF functions go, I'm getting "Media I/O error," and depending on the CF menu item task, "Drive offline" or "Drive not formatted, would you like to format it?", even when the card is in, seated properly (of course), and formatted. Incidentally, on the last job, it recorded to the cards just fine. But this time it didn't. So now, I'm working to get the files off the INHDD, and I now find that the 744T doesn't seem to recognize, ANY other drives. After connecting a Firewire 400 ready MacBook Pro to the 744T directly, and then a Firewire 400 Lacie drive to the 744T directly, none of the seem to mount. It doesn't see it's own CF card (or drive) upon attempting to do an INHDD > CF transfer, either. It looks as if the only drive the 744T can see...would be it's own internal drive, and that's it. I love my 744T. I've always handled it with extreme care. It's never been subjected to harsh elements, hard jolts, drops or vibrations, luggage compartments (I carry it on), or anything like that. I purchased it new in 2010. Has anyone experienced issues like this, or similar? Does the 744T have any history of this? I sure don't see one. I did a little search of the site here, and didn't come up with anything, so I'm looking for advice before I send it off. Is there a firmware upgrade needed? What am I missing here? Above all, how can I get at these files? This doesn't look good. It's getting downright sassy with me. Help. Rachel Cameron www.rachelcameron.com