Jump to content
Mark Vesterskov

Show me your bag

Recommended Posts

whenever you start selling your OneUnit designs, let me know ;-)

My OneUnit is the product of many hours hard labor and requires a lot of modification to the nomad.

If Zaxcom wants to design a OneUnit machine I will be happy to be hired as a consultant. (:

 

 

Share this post


Link to post
Share on other sites

My OneUnit is the product of many hours hard labor and requires a lot of modification to the nomad.

If Zaxcom wants to design a OneUnit machine I will be happy to be hired as a consultant. (:

I can help out --- I'll bring the chainsaw

Share this post


Link to post
Share on other sites

My OneUnit is the product of many hours hard labor and requires a lot of modification to the nomad.

If Zaxcom wants to design a OneUnit machine I will be happy to be hired as a consultant. (:

 

 

well, I guess until then, I'll have to stick with my NonOneUnit.

Share this post


Link to post
Share on other sites

 Where did you get your AES cable? I'm currently looking for one. You have any pictures of cable set up in your bag. 

I'm in the process of building an aes cable 3 pair in and 3 pair out.  Have all the parts - just got to find the time. 

Most dealers can build you a cable - I don't think anyone stocks an aes cable since there are way too many different combinations of connectors.

Share this post


Link to post
Share on other sites

 Where did you get your AES cable? I'm currently looking for one. You have any pictures of cable set up in your bag. 

One of the usual suspects built it for me. As Jack said, most dealers can build it for you. I doubt that you will find anything off the shelves, since there are so may different combinations you can do.

Share this post


Link to post
Share on other sites

I'm in the process of building an aes cable 3 pair in and 3 pair out.  Have all the parts - just got to find the time. 

Most dealers can build you a cable - I don't think anyone stocks an aes cable since there are way too many different combinations of connectors.

One of the usual suspects built it for me. As Jack said, most dealers can build it for you. I doubt that you will find anything off the shelves, since there are so may different combinations you can do.

 cool thanks guys, yea one of the usual suspects in LA made one for another mixer but I didn't like the way they did it I'll check out some other spots. Appreciate your feedback!

Share this post


Link to post
Share on other sites

 

 cool thanks guys, yea one of the usual suspects in LA made one for another mixer but I didn't like the way they did it I'll check out some other spots. Appreciate your feedback!

Also worth looking:

Scott Beatty @ Twin Audio (http://www.twinaudiocables.com/hydra-series/)
Matt Radlauer @ Clear Cut audio (http://www.clearcutaudio.com/)

Both excellent marksmen when it comes to custom audio cables.

Share this post


Link to post
Share on other sites

Also worth looking:

Scott Beatty @ Twin Audio (http://www.twinaudiocables.com/hydra-series/)
Matt Radlauer @ Clear Cut audio (http://www.clearcutaudio.com/)

Both excellent marksmen when it comes to custom audio cables.

GAGaudio,

If you're still looking for the AES cable we can help you out with whatever you need. Obviously everyone else mentioned does great work as well.

Gene Martin

Audio Department 

drew @ audiodept .com

 awesome guys thanks!

 

@ Audio Dept I thought of asking you guys since you always help me with everything else.

-Andy  

Share this post


Link to post
Share on other sites

fully operational and extremely lite. this is the main bag. everything else will attach to it - transmitters, and accessory pockets but will have the option to remove it. size is as tight as possible and the balance is excellent. cordura 1000 with closed cell foam and water proof panel board on the bottom. it all seats on rubber pyramids. will replace the hard Velcro with soft when I get the chance to buy some. Total cost 1 hour labor and $13 in material.

 

 

 

11659370_10207612006998145_9211538901425

 

11233501_10207612006358129_2533276419796

 

12004907_10207612006438131_5517782892749

 

11214325_10207612009758214_6763612430530

 

12002818_10207612010078222_4322438108770

 

12011263_10207612013838316_4214838491031

 

12011238_10207612014358329_3154388095748

 

12004112_10207612014438331_2738665432287

 

12006375_10207612014758339_6272777876341

 

Share this post


Link to post
Share on other sites

 Cool rig, Alex. Just curious, what model boom pole is that? Mine doesn't quite fit in my 1650. 

I'm pretty sure that's a K-Tek KE89CC.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×