curleysound Posted June 14, 2007 Report Share Posted June 14, 2007 I'm wondering if a Lectro UH-195 plug on xmtr would work with a UCR211 rcvr if the frequencies match? Thanks, Tom Quote Link to comment Share on other sites More sharing options...
Ramsay Posted June 14, 2007 Report Share Posted June 14, 2007 Yes it will. However, if you get the "UH200D" model it will also be able to power a 48V mic. Quote Link to comment Share on other sites More sharing options...
curleysound Posted June 14, 2007 Author Report Share Posted June 14, 2007 Hmmm... Getting conflicting reports now. One says yes, one says no. Anyone have one of each of these that they've used together? I'm looking at the Plug-On xmtr on ebay and would hate to get it home only to find it won't talk to my receiver. Quote Link to comment Share on other sites More sharing options...
Ramsay Posted June 14, 2007 Report Share Posted June 14, 2007 The 211 is a non digital receiver and should work with the transmitter. Quote Link to comment Share on other sites More sharing options...
curleysound Posted June 15, 2007 Author Report Share Posted June 15, 2007 From Larry @ Lectrosonics: Hi Tom, The UH195 is fully compatible but make sure the crystal set frequency falls on a 100 kHz step that the UCR211 can tune to such as 608.100 or 611.500 not a 25 kHz step such as 608.025, 608.50 or 608.075. Best Regards, Larry Fisher Lectrosonics Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.