imagist Posted September 17, 2007 Report Share Posted September 17, 2007 I have three pairs of HD25's and they are very tough with the stainless steel cable etc. except for one thing and thats the connection between the cable and the headphone capsule. I always end up with a problem with this, where the small flat 2 pin connector makes contact inside the headphone capsule. I've just taken one apart, and broke one of the very fine wires that goes to the driver unit:-( and there's a small silver spring mounted transversely that the prongs of the connector simply push in to. The spring has an arm on it and it can be pulled out but I can't really see why there should be a problem with making contact. Any one got any ideas or experience with fixing this please? Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.