Zach R Posted February 7, 2013 Report Share Posted February 7, 2013 does anyone know where to buy the threaded 1/8" mono connector that are used for the lectro MM's? trying to make an adaptor to go from Ta5 to the threaded cable for an MM200 that will work with a standard mc30/40 for hops as well as standard lectro ta5 lav connector. The adaptors I have now don't work with any mc30/40/41s I've tried. Quote Link to comment Share on other sites More sharing options...
studiomprd Posted February 7, 2013 Report Share Posted February 7, 2013 Your favorite Lectro dealer Quote Link to comment Share on other sites More sharing options...
johnpaul215 Posted February 7, 2013 Report Share Posted February 7, 2013 Lectro sells adapters if you don't feel like making your own, otherwise I would email/call Lectrosonics. they will give you an exact part number. I always ordered mics wired for MM, though my MM mics came with a kit to wire a lav (the connector parts and a tiny tube of silicon seal). Quote Link to comment Share on other sites More sharing options...
Zach Noblitt Posted February 7, 2013 Report Share Posted February 7, 2013 Here is an adapter from Lectro's site: http://www.lectrosonics.com/34-MCABRLTA5MUWP/View-details.html It works with the MM200 as well as the MM400 and the WM. Quote Link to comment Share on other sites More sharing options...
Zach R Posted February 8, 2013 Author Report Share Posted February 8, 2013 thanks for pointing me in the right direction! I think what I'm really looking for is just the Submini Phone Connector part to build my own with. I can't seem to find one that's threaded like the MM jack is. does anyone know if this is a lectrosonics specific connector? or would I be able to find it somewhere within the depths of the interweb? Quote Link to comment Share on other sites More sharing options...
LarryF Posted February 8, 2013 Report Share Posted February 8, 2013 http://www.mouser.com/MobileCatalog.aspx?page=1354 See the fourth line down "502-851x" It's the first item under "accessories" and then "microphone" on our site. http://www.lectrosonics.com/Microphone/ Or call Lectro for PN# 21357 1-800 821-1121 http://www.lectrosonics.com/67-21357/View-details.html Best Regards, Larry Fisher Lectrosonics Quote Link to comment Share on other sites More sharing options...
Zach R Posted February 8, 2013 Author Report Share Posted February 8, 2013 Hey Larry, thanks for the reply. I'm looking at those connectors and it seems those are female threads. I could be mistaken but is there a male threaded connector that would work for the mm200's just like that? Quote Link to comment Share on other sites More sharing options...
LarryF Posted February 8, 2013 Report Share Posted February 8, 2013 Hey Larry, thanks for the reply. I'm looking at those connectors and it seems those are female threads. I could be mistaken but is there a male threaded connector that would work for the mm200's just like that? Yes, the 851 connector locks to the male threads of the microjack in the transmitter. There is no connector, other than what we make, that locks to the female threads of the case. You really should use our connector in that it transfers all forces to the main case and not the jack and it is of course waterproof. Best, Larry F Lectro Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.