tong Posted February 7, 2008 Report Share Posted February 7, 2008 Hi. Am currently using a wendt x4. Just recently tried using the audio technica atw-100 series as a headphone cue. i realise that the wendt x4 has a mic out instead of the usual tape out on fp33 and sd mixers. did some read up and it says that the mic out provides 50dB below line level signal (which should be -60dB). need some advice on the connection schematics to do a 1/8" to Switchcraft TA5F (5 pin mini-XLR) cable for connecting from x4 mic out to audio technica transmitter.[/b Thanks! Quote Link to comment Share on other sites More sharing options...
Sergio Sanmiguel Posted February 7, 2008 Report Share Posted February 7, 2008 Look on page five of the AT-u100 series manual Quote Link to comment Share on other sites More sharing options...
wbrisett Posted February 7, 2008 Report Share Posted February 7, 2008 FYI, I had Wendt modify my X4 so that it was line out instead of mic out. He did that for nothing when I ordered the unit. I don't know what he would charge if you wanted to have your unit modified, but I do know he will build them that way if you want. Wayne Quote Link to comment Share on other sites More sharing options...
tong Posted February 7, 2008 Author Report Share Posted February 7, 2008 Thanks man. Will e-mail wendt to ask for quotation. Quote Link to comment Share on other sites More sharing options...
Sergio Sanmiguel Posted February 7, 2008 Report Share Posted February 7, 2008 Probably better to give Bob a call... I don't think he ever reads he's e-mails Quote Link to comment Share on other sites More sharing options...
Glen Trew Posted February 8, 2008 Report Share Posted February 8, 2008 Mic level out on the Wendt X4 is -50 and Line level out on Wendt X4 is 0db www.wendtmixers.com Don't see where the specs say line out is 0dB. Would be surprised if it's not +4dBu. Glen Trew Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.