Michael P Clark Posted April 14, 2006 Report Share Posted April 14, 2006 I have a 442, 3x 411a's, 744, in a Pertrol Pegz1. Mixer/744/411's front to back. I am getting RF indication on the 411's from the 744. Mainly from the block 26's (x2). The frequency scan shows 1 to 3 RF "pixels" along the bottom, everywhere, more where there is normal RF. When I power down the 744 and restart the 411's for another sweep, everything is normal. I know alot of you guys have this same setup(except for block assignment perhaps). What are you doing to keep this from happening? I've tried swapping 442 and 744 but cables won't fit. Is there anything you can put between the 744 and 411's? Is this minor RF that won't effect me much? It seems most prevelant on block 26 than 27. Mike Clark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.