TomBoisseau Posted January 14, 2014 Report Share Posted January 14, 2014 Is the output of the Sennheiser G3 wireless receiver "hot" enough to properly drive the line level only inputs on the Alexa? I was planning on using my G3's to send a mono scratch track to the Alexa on a shoot this coming weekend. I've worked with the Alexa before, but never with a G3 receiver. Thanks, Tom Quote Link to comment Share on other sites More sharing options...
Steve Foy Posted January 14, 2014 Report Share Posted January 14, 2014 Yes Quote Link to comment Share on other sites More sharing options...
Eric Toline Posted January 14, 2014 Report Share Posted January 14, 2014 Turn up the rx output to at least "0" or +4 and you will be fine. Eric Quote Link to comment Share on other sites More sharing options...
TomBoisseau Posted January 15, 2014 Author Report Share Posted January 15, 2014 Thanks guys. It's always nice to know BEFORE the shoot if it's going to work. Tom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.