chrisyking Posted January 15, 2015 Report Share Posted January 15, 2015 So I have my 4 Wisycom channels which have been working really well, but i still have one question. How are the preset frequencies on the receiver organised? Should I keep each transmitter on a different group? Is that how they are arranged? It seems like there are a ton of frequencies in each group, so am I supposed to keep my 4 channels on different channels but on the same group to avoid intermod, or am I supposed to keep them in any channel but in different groups? I'm not sure how the Wisycom preset frequencies have been chosen...... Anyone? Quote Link to comment Share on other sites More sharing options...
Johnny Karlsson Posted January 15, 2015 Report Share Posted January 15, 2015 (I can see the Senator sitting in front of his keyboard, biting his fingers, trying very hard to restrain himself LOL) I have personally not used Wisycom wireless, but logic would suggest that they have arranged the groups in such a way that the frequencies within a group play nicely with each other - therefore they are a group. I bet all the answers to your questions can be found here: http://www.wisycom.com/www3/storage/downloads/Products/MTP40-en-u04-A5.pdf Quote Link to comment Share on other sites More sharing options...
VM Posted January 15, 2015 Report Share Posted January 15, 2015 The four frequencies in the same group is the safer way to do. Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 15, 2015 Author Report Share Posted January 15, 2015 O.K. thanks that's what I thought, but I tried having four channels on the same group today and I had some cross talk. That's why I thought maybe it was arranged slightly differently. Unfortunately the manuals have almost no explanation of how and why they chose the presets they have. I tried four channels on group 09 and the fourth radio was causing intermod on the other channels... Maybe Massimo will read this and explain? Quote Link to comment Share on other sites More sharing options...
Johnny Karlsson Posted January 15, 2015 Report Share Posted January 15, 2015 Did you try another frequency within that group for the 4th radio? or perhaps: turn on the 3 sets that play nice and scan for a clean channel on the fourth one? Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 15, 2015 Author Report Share Posted January 15, 2015 I think group 09 is some special kind of group. Maybe that's why it's acting funny. I'll try another group tomorrow. From the manual: ' A scan on group 0 will reveal in few seconds the overall DVB-T occupation on the area, while a scan on group 9 will give possible working frequency, usable also in presence of strong DVB-T signal (sort to speak working in the bandguard of 2 digital television channel).' What the hell does that mean? Does that mean group 0 has all frequencies on it? Can anyone explain this? Sorry for being thick. Chris Quote Link to comment Share on other sites More sharing options...
Jeff Wexler Posted January 15, 2015 Report Share Posted January 15, 2015 I think when they ran the manual through Google Translate something got lost going from Italian to English. Just kidding... but it is rather confusing. Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 15, 2015 Author Report Share Posted January 15, 2015 I'm lost. The groups are arranged as 40 groups of 60 channels. I assume the channels in each group must be intermod free otherwise why would they bother. Think this is fairly standard no? Re groups 0 and 09 here's the full quote: As per Wisycom standard, group 0 and group 9 are special; respectively the “center frequency” (474,482/... MHz) and the intergap frequency (i.e. 470/478/486/... MHz). A scan on group 0 will reveal in few seconds the overall DVB-T occupation on the area, while a scan on group 9 will give possible working frequency, usable also in presence of strong DVB-T signal (sort to speak working in the bandguard of 2 digital television channel). I'm not sure how that works. Maybe group 0 has frequencies which DVB-T use normally or something.... who knows... Or maybe 0 and 9 have the entire range of frequencies so you can see what DVB-T is operating in the area. Quote Link to comment Share on other sites More sharing options...
Constantin Posted January 16, 2015 Report Share Posted January 16, 2015 Or maybe you don't use groups 0 and 9 if you don't know what they are there for. Use any of the renaining 8 groups until you have contacted Wisycom and have heard back from them , rather than waiting for a reply from Wisy here. Quote Link to comment Share on other sites More sharing options...
JDirckze Posted January 16, 2015 Report Share Posted January 16, 2015 I didn't think anyone could make a worse manual than Zaxcom, but it seems we have a winner [emoji6] Quote Link to comment Share on other sites More sharing options...
Doug Beatty Posted January 16, 2015 Report Share Posted January 16, 2015 Think of scans on the ATSC and intergap groups as core samples that give you an overall topography of the RF in your area. When you run those scans, take note of the cleanest group and then rescan that specific group to find the cleanest channels within. I believe they did this to save time because scanning the entire roster of wideband frequencies would take a few minutes at a time. I only have two TXs, so I usually just do a scan on ATSC and then my second scan on intergap and assign my packs to the clearest channel on each. Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 16, 2015 Author Report Share Posted January 16, 2015 Thanks Doug. It seems that groups 00 and 01 are intergap and center scan, but they only give a scan over the entire range. The results are given as channels rather than groups, so I can't see how useful it is. If you do a scan on group 00 for example it gives you a load of free frequencies, but as channels, so to work out what groups are the most free from this will be quite difficult. One would have to write down each frequency then look on a chart to see what groups they were in..... Useless? PS tried Wisycom. They haven't got back to me. Quote Link to comment Share on other sites More sharing options...
Matthew Sonnenfeld Posted January 16, 2015 Report Share Posted January 16, 2015 I've had pretty good luck with WisyCom when I call them. Once had a big issue so stayed up until 3am in NY to call at 9am Italian time. I wasn't proud of myself for that one but they were there and they helped. Quote Link to comment Share on other sites More sharing options...
Derek H Posted January 16, 2015 Report Share Posted January 16, 2015 Chrisy, I was a little confused at first by the groups too when I had a set on demo. I thought it was curious that it can only scan the programmed group frequencies and not it's full tuning range all at once. Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 16, 2015 Author Report Share Posted January 16, 2015 From what I understand you do a scan on group 00. You pick a channel from that scan, look at the frequency then using their chart, you can get the group to work on..... I think that's how it works, but not sure...... Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 16, 2015 Author Report Share Posted January 16, 2015 Derek. I think they arrange it in groups so you can avoid intermod. I Think you can do a full scan on the later unlocked groups, but I'm still trying to work it out. WIsycom manuals suck big time Are there any Wisycom users who can explain? Quote Link to comment Share on other sites More sharing options...
Matthew Sonnenfeld Posted January 16, 2015 Report Share Posted January 16, 2015 This is a source of confusion for me as well. As I understand it you are on the right track. I use Freq Finder and that helps me stay intermod free. The knowledge base is growing, that's the good thing. Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 16, 2015 Author Report Share Posted January 16, 2015 What's freq finder? Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 16, 2015 Author Report Share Posted January 16, 2015 Found it. Downloaded it on android. Thanks for tipping me off about that!! Quote Link to comment Share on other sites More sharing options...
Matthew Sonnenfeld Posted January 16, 2015 Report Share Posted January 16, 2015 Sure thing! It's pretty extensive and well worth it in my opinion. Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 16, 2015 Author Report Share Posted January 16, 2015 Crashes a bit for me. I still want to understand Wisycom's system though. It seems like they have all the intermod groups laid out. If only they would explain how the system works. Have to say I've been massively impressed with the sound quality of my Wisycoms. I have four units going into my sd633. I put channel 3 and 4 into line inputs 5 and 6 of the mixer. You have to put the line level to it's highest setting. That's the only thing I'm not happy with. The line level is a bit low on the MCR42. There's no way to get more juice out of them? Quote Link to comment Share on other sites More sharing options...
ncg Posted January 17, 2015 Report Share Posted January 17, 2015 Crashes a bit for me. I still want to understand Wisycom's system though. It seems like they have all the intermod groups laid out. If only they would explain how the system works. Have to say I've been massively impressed with the sound quality of my Wisycoms. I have four units going into my sd633. I put channel 3 and 4 into line inputs 5 and 6 of the mixer. You have to put the line level to it's highest setting. That's the only thing I'm not happy with. The line level is a bit low on the MCR42. There's no way to get more juice out of them? At the risk of asking the obvious questions, does tone reference correctly from the wisy to the 633? Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 17, 2015 Author Report Share Posted January 17, 2015 No that's another question I had. I set the level nicely on the TX meters, then switch the tone on 0db on the receiver. I line up the Wisys 0db tone on the mixer at 0db and when I turn the tone off and put the tx on the level is tiny. Maybe I'm supposed to have the wisys tone on -18db? Quote Link to comment Share on other sites More sharing options...
chrisyking Posted January 17, 2015 Author Report Share Posted January 17, 2015 I seem to have to have the MCR42 at full level and my 633 gain at full on ch5 and 6 (line level) to get a decent signal..... Quote Link to comment Share on other sites More sharing options...
VM Posted January 17, 2015 Report Share Posted January 17, 2015 shut down all the transmitters choose a group (but not 0 or 9*) scan receiver 1, accept the frequency it finds, transmit it by IRDA to the transmitter, put on the transmiter 1 scan receiver 2 in the same group, accept the frequency it finds, transmit it by IRDA to the transmitter, put on the transmiter 2 scan receiver 3 in the same group, accept the frequency it finds, transmit it by IRDA to the transmitter, put on the transmiter 3 scan receiver 4 in th esame group, accept the frequency it finds, transmit it by IRDA to the transmitter, put on the transmiter 4 and so on if you have more radio mics. Jsut note that while shooting if another frequency is coming (from another crew) it may work or... not. Jus t ask the sound guy from the other crew to coordinate his frequencies with yours. If not, youoneed to do again all those scans. *Group 0 and 9 are not free of intermod, they are center and intergap of DVBT channels. Center is to have a quick picture of the spectrum. Choose another locked channel. Intergap in case of a desperate situation without any free frequency ; you can try to work between the DVBT channels. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.