foliver Posted April 17, 2015 Report Share Posted April 17, 2015 Hello group.. Someone in my country is selling a 300 iem g3 in good cosmetical order, B block. I've tested it with a G2 tx, and the unit doesn't pick up rf signal. Nothing. I pair both units, in the same freq and nothing. Someone has had a similar problem?, is this thing repairable? I can have it at 50 bucks, but i don't know if the repair can be expensive.... Any ideas? Thanks for your opinions. Fabian Quote Link to comment Share on other sites More sharing options...
jason porter Posted April 17, 2015 Report Share Posted April 17, 2015 You might have to turn off the Pilot Tone on the transmitter. Turn it off then try to pair it with the receiver. Quote Link to comment Share on other sites More sharing options...
Constantin Posted April 17, 2015 Report Share Posted April 17, 2015 Yes, pilot tone is almost always where even experienced pros can go wrong Quote Link to comment Share on other sites More sharing options...
John Ronnerblad Posted April 17, 2015 Report Share Posted April 17, 2015 I had the same situation with a Sennheiser 2000 tx and by turning off the pilot tone: problem solved. Skickas från min iPhone via Tapatalk Quote Link to comment Share on other sites More sharing options...
RScottATL Posted April 20, 2015 Report Share Posted April 20, 2015 Call Sennheiser. They are always easy to get ahold of a real live human and have always given me amazing service and support. Quote Link to comment Share on other sites More sharing options...
.png.279748a58a2b862b7aa5f3b84126e232.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.