Glen Trew Posted April 26, 2015 Report Share Posted April 26, 2015 Do you have the Deneck slate set to "AUTO"? (Meaning to automatically select the timecode framerate). The setting should not be used with Zaxcom equipment with frame rates of 29.97 or 23.976. gt Quote Link to comment Share on other sites More sharing options...
hiro nakamura Posted April 27, 2015 Author Report Share Posted April 27, 2015 Do you have the Deneck slate set to "AUTO"? (Meaning to automatically select the timecode framerate). The setting should not be used with Zaxcom equipment with frame rates of 29.97 or 23.976. gt Hi Glen, I didn't set it to auto, for 29.97 , I put the clock on 1, and when I did another test, I put the clock on 2, which was 25. I set my nomad tc accordingly. Hiro Quote Link to comment Share on other sites More sharing options...
jKennedy Posted November 12, 2016 Report Share Posted November 12, 2016 I know this is an old topic but I wanted to chime in for anyone looking for more answers. I just picked up a TS-3 and noticed a similar issue where the TC display on the slate and a 633 I just jammed from was off a few frames if I took a picture with my phone. HOWEVER, with the slate closed but still on I'm able to send the TC back into the 633 where it shows zero difference in the jam menu. I hope this helps. I'm just hoping that the slate is more 'picture accurate' then the display on my 633. Cheers! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.