Ronald Posted April 24, 2015 Report Share Posted April 24, 2015 Here's a inexpensive tip for anyone with an Avalon right angle boom pole. Keeps the end from getting banged up and also prevents sliding when you prop it up against the wall briefly. Package of two at Ace Hardware. Three bucks and change. 11/2"-38mm size. Quote Link to comment Share on other sites More sharing options...
JonG Posted April 24, 2015 Report Share Posted April 24, 2015 awesome! Quote Link to comment Share on other sites More sharing options...
Rich Reilly Posted May 3, 2015 Report Share Posted May 3, 2015 Happen to have any info off packaging? What was its "intended" use? Quote Link to comment Share on other sites More sharing options...
Q Posted May 3, 2015 Report Share Posted May 3, 2015 They are commonly called "crutch tips" or "chair tips" depending on the size. Quote Link to comment Share on other sites More sharing options...
Nate C Posted May 4, 2015 Report Share Posted May 4, 2015 Yep I used the same kind of thing when I converted a 4 stage Panamic pole into a 3 stage pole. Got it from a hardware store in the furniture protection section. Pretty sure the packet said stool tip. Quote Link to comment Share on other sites More sharing options...
Rachel Cameron Posted May 17, 2015 Report Share Posted May 17, 2015 Since we're on the subject of cheap feet, here's something I made for my VDB. It's been useful for movies where I'm doing more standing around than booming. Quote Link to comment Share on other sites More sharing options...
sfxdude Posted May 20, 2015 Report Share Posted May 20, 2015 Interesting Idea, but I would think it might stress the XLR connection at the base after a while of use because of the length of a Switch-Craft connector and it being directly plugged in. Just a thought. Cool DIY though. Quote Link to comment Share on other sites More sharing options...
Rachel Cameron Posted May 23, 2015 Report Share Posted May 23, 2015 I thought of that too...though it was much later. I still use it sometimes, but considering the fact that the total weight of the boom/mic (not much, but still) would sit on the XLR connection, I agree - it doesn't seem like the best practice. It never made as much as a peep though, and thanks for the reply. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.