RadoStefanov Posted September 12, 2015 Author Report Share Posted September 12, 2015 (edited) this is the smallest hotel safe on the market . inside i have: OneUnit, slate, 8 trx900la2.5, 8 dpa 4063, 1 trx742,5 erx100tcd, 1 comtek TX, 5 comtek RX, 4 mozegear tigq28, 1 tentacle sync, 1 mkh8060, 2 mkh8040 , 1 cinela mount and foam for the mkh8060. I can fit 2 scheops foams and a few more things.I will fit all that in a pelican that can fit in the overhead compartment of an airplane and will never have to check in my gear Edited September 12, 2015 by RadoStefanov Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted October 8, 2015 Author Report Share Posted October 8, 2015 (edited) Since my harness is attached to the OneUnit Nomod I made holes for the headphone and zaxnet antenna. I believe this approach is better then attaching the harness to the bag and have everything else inside moving around. Edited October 9, 2015 by RadoStefanov Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted October 8, 2015 Report Share Posted October 8, 2015 Since my harness is attached to the OneUnit Nomod I started made holes for the headphone and zaxnet antenna. I believe this approach is better then attaching the harness to the bag and have everything else inside moving around. Very nice. The whole concept of external protective panels, as opposed to a bag, bears consideration by some of our supplying manufacturers. Cameras have gone the route of mounting plates that allow almost any type of configuration, built in attachment threading might have a future with the next generation of multipurpose audio devices. Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted October 8, 2015 Author Report Share Posted October 8, 2015 (edited) Thanks John. My approach makes a lot of sense. It makes everything smaller and a lot more balanced. It should work great for SD688 and sl6 Oneunit devices. Edited October 8, 2015 by RadoStefanov Quote Link to comment Share on other sites More sharing options...
berniebeaudry Posted October 9, 2015 Report Share Posted October 9, 2015 Thanks John. My approach makes a lot of sense. It makes everything smaller and a lot more balanced. It should work great for SD688 and sl6 Oneunit devices. You're quite the innovator Rado! Keep up the good work! Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted October 9, 2015 Author Report Share Posted October 9, 2015 Thanks. More to come. Quote Link to comment Share on other sites More sharing options...
Fritz Posted October 12, 2015 Report Share Posted October 12, 2015 would someone educate me with regard to power disto from an Inspired Energy or other? SD 633 with 4 Lectro 411s and perhaps a PSC SMA. I would batt the cam hop and prod IFB. Quote Link to comment Share on other sites More sharing options...
Ze Frias Posted October 13, 2015 Report Share Posted October 13, 2015 would someone educate me with regard to power disto from an Inspired Energy or other? SD 633 with 4 Lectro 411s and perhaps a PSC SMA. I would batt the cam hop and prod IFB. Inspired Energy doesn't make power distros, only smart batteries, chargers and accessories. They do make a "battery cup" that you can wire to any power distro of your liking. But if you wish to use SMBus, which is the main advantage of these batteries, the only power distros available in the market catered to us that will fit suit are the Audioroot ones. Quote Link to comment Share on other sites More sharing options...
Fritz Posted October 13, 2015 Report Share Posted October 13, 2015 (edited) thanks Jose. But seems like they make both from their website. In any case, trying to determine what batt to get. Edited October 13, 2015 by Fritz Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted October 14, 2015 Report Share Posted October 14, 2015 Hey Rado--I was in Reno last week and when I saw the hotel-room safe the first thing I thought of was your new rig! Have had the opportunity to travel with it much? p Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted October 14, 2015 Author Report Share Posted October 14, 2015 Yes. I went to palm springs and st. George Utah. I fit all expensive stuff. OneUnit, wireless TX, Lavs, booms, slate, jam boxes in the safe no problem. Quote Link to comment Share on other sites More sharing options...
Michael Miramontes Posted October 17, 2015 Report Share Posted October 17, 2015 Rado, I've heard your name pronounced many different ways. What is the correct way to pronounce it? Ra-doh Ray-doh ?? Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted October 20, 2015 Author Report Share Posted October 20, 2015 Rado, I've heard your name pronounced many different ways. What is the correct way to pronounce it? Ra-doh Ray-doh ?? Ra-Do Ra, like the sun god of the Egyptians and Do, like Do Re Mi Fa Sol La Si Do. OneUnit vs Orca bag. I love carrying the OneUnit all day. I don't think I can ever go bag to any other setup. Quote Link to comment Share on other sites More sharing options...
osa Posted November 2, 2015 Report Share Posted November 2, 2015 this nomod rig is incredible. wow -Ken Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted November 2, 2015 Author Report Share Posted November 2, 2015 Thanks Quote Link to comment Share on other sites More sharing options...
shug Posted November 6, 2015 Report Share Posted November 6, 2015 Yep that's a 'wow' all day long. My back feels better just looking at it.... Quote Link to comment Share on other sites More sharing options...
Mikko Kolehmainen Posted November 9, 2015 Report Share Posted November 9, 2015 this is the smallest hotel safe on the market . inside i have: OneUnit, slate, 8 trx900la2.5, 8 dpa 4063, 1 trx742,5 erx100tcd, 1 comtek TX, 5 comtek RX, 4 mozegear tigq28, 1 tentacle sync, 1 mkh8060, 2 mkh8040 , 1 cinela mount and foam for the mkh8060. I can fit 2 scheops foams and a few more things.I will fit all that in a pelican that can fit in the overhead compartment of an airplane and will never have to check in my gear All that and pelican, isn't that still too heavy for carry-on? No blimp at all?This is really beautiful project Rado, I'm thinking about trying out similar bag design for Nomad+QRX100+Audioroot battery and distro. Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted November 9, 2015 Author Report Share Posted November 9, 2015 All that and pelican, isn't that still too heavy for carry-on? No blimp at all?This is really beatiful project Rado, I'm thinking about trying out similar bag design for Nomad+QRX100+Audioroot battery and distro. I am thinking about just making cordura+foam case and skipping on the pelican. Quote Link to comment Share on other sites More sharing options...
.png.279748a58a2b862b7aa5f3b84126e232.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.