LazerBeam Sound Posted September 25, 2015 Report Share Posted September 25, 2015 The show I'm on is going to Dubai! We use block 19&21 for cast. Block 25 camera hops and Block 24 for IFB. I have read a lot of people having success with block 21 in Dubai so I'll make that our main block. I would still need six usable freqs from block 19. Is this a bad idea should sub rent another block and pull out my block 19 for this trip. Quote Link to comment Share on other sites More sharing options...
sarcanon Posted September 25, 2015 Report Share Posted September 25, 2015 I think Matt Price from soundrolling.com was just in Dubai. Shoot him an email (matt@) and maybe he'll be able to tell you. Quote Link to comment Share on other sites More sharing options...
LazerBeam Sound Posted September 25, 2015 Author Report Share Posted September 25, 2015 Thank You Quote Link to comment Share on other sites More sharing options...
JDirckze Posted September 26, 2015 Report Share Posted September 26, 2015 I was there a few months ago. Talent Tx on Lectro block 24, wireless boom on Lectro block 27, and Zaxcom link on block 25. Didn't have any issues Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted September 26, 2015 Report Share Posted September 26, 2015 what are blocks? Quote Link to comment Share on other sites More sharing options...
pindrop Posted September 26, 2015 Report Share Posted September 26, 2015 (edited) what are blocks? Yes quite, I always have to look up the Lectrosonics chart because very very few seem capable of talking in Mhz for some unfathomable reason? It's American TV blocks, which may be fine if you're in the USA, but it may surprise some, that a few in the rest of the world aren't. Edited September 26, 2015 by pindrop Quote Link to comment Share on other sites More sharing options...
Jack Norflus Posted September 27, 2015 Report Share Posted September 27, 2015 Yes quite, I always have to look up the Lectrosonics chart because very very few seem capable of talking in Mhz for some unfathomable reason? It's American TV blocks, which may be fine if you're in the USA, but it may surprise some, that a few in the rest of the world aren't. I believe the the reference is that Rado uses wide band Zaxcom so no real blocks to deal with. Quote Link to comment Share on other sites More sharing options...
pindrop Posted September 27, 2015 Report Share Posted September 27, 2015 I believe the the reference is that Rado uses wide band Zaxcom so no real blocks to deal with. Yes quite, but couldn't resist a chance to question why we can't use Mhz, which doesn't require clumsy translation? Quote Link to comment Share on other sites More sharing options...
JDirckze Posted September 27, 2015 Report Share Posted September 27, 2015 Yes quite, I always have to look up the Lectrosonics chart because very very few seem capable of talking in Mhz for some unfathomable reason? It's American TV blocks, which may be fine if you're in the USA, but it may surprise some, that a few in the rest of the world aren't. [emoji4] We use blocks here in Australia too. The American TV blocks. But it may surprise you that Australia is not a state in the US of A... Even though it sometimes feels like we are [emoji6] Quote Link to comment Share on other sites More sharing options...
Boomboom Posted September 27, 2015 Report Share Posted September 27, 2015 The original question is clear: ''Lectrosonics blocks'' ... Quote Link to comment Share on other sites More sharing options...
Gordonmoore1 Posted September 28, 2015 Report Share Posted September 28, 2015 Actually, this thread surprises me just a bit. We do "speak in MHz" - just read the data sheets. The blocks have NO relation to American television TV channel assignments. They are based on the original 256 Channel capability of the first frequency agile products we came out with that were set with two 16 position switches. That gave us 256 possible frequency combinations spaced 100Mhz apart. So, each "block" of frequencies was based on that binary startup. The dual number blocks (Block XX) could be calculated for their starting XXX.XXX MHz coverage by simply multiplying the block number by 25.6 (the bandwidth in MHz). Block 21 for example is 25.6MHz X 21 = 537.600 MHz. Block 22 starts at 563.200 (25.6 Mhz X 22). etc etc. Each block covers 25.6Mhz (unless otherwise defined by the law of the land) For the block with THREE digits (Block XXX) - these are special blocks - such as 606.000MHz (popular in the UK) or 470 which is the very lowest channel available in the USA. They indicate the starting frequency right up front. As we got away from the dual switches and went to the front panel buttons, we could get finer definition and the actual need for block designations was eliminated - except that by then, everyone talked in"Blocks" . Additionally, we made our units backwards compatible to we kept the binary codes and blocks designators since everyone was used to using them. So, we elected to keep the block designations for ease of comparison. The new wide band products cover a wider range and when you read the displays, you readily see both the older binary codes (00 to FF) for example and the numerical representation as well. If the frequency lies between the 0.100 MHZ standard gaps from the binary switched products, only the actual freq is displayed. Data sheets show what each block covers in MHz. Quote Link to comment Share on other sites More sharing options...
LazerBeam Sound Posted September 28, 2015 Author Report Share Posted September 28, 2015 I was there a few months ago. Talent Tx on Lectro block 24, wireless boom on Lectro block 27, and Zaxcom link on block 25. Didn't have any issues Thank you going with block 21 for talent, Block 19 for back up! Block 25 for camera sends Quote Link to comment Share on other sites More sharing options...
JDirckze Posted September 28, 2015 Report Share Posted September 28, 2015 Thanks for that info Gordon. Always a chance to learn something new here at JWSG! Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Sam Kashefi Posted September 30, 2015 Report Share Posted September 30, 2015 (edited) This is for anyone who travel to Dubai for audio work. I've lived there between 2004-2013. Currently based in New York. I owned blocks 19-25 and they were pretty much clear. ( No TV Station within that Frequency length ) Comteks are a bit an issue. i'd suggest to use Dipole or Phase right antenna. It's always a good idea to include your kit list with camera kit. Dubai Airports are usually easy to deal with when you show them a camera along with the rest of the gear. Rental : Atlas Television - http://atlastelevision.com/ - Lectrosonics, Sound Devices, SQN And Sennheiser Film Quip Media - http://www.filmquipmedia.com/ - Lectro, Sound Devices Dealers : N.M.K Electronics - http://www.nmkelectronics.com/ - Sound Devices, DPA, Shure, Yamaha VenueTech - http://www.venuetech.ae/ - Sennheiser Veteran Sound Mixers : David Therion, Farhad Rahmani, Dave Arnold, Tom Savage ( PM me if you need their contact information ) Grab a beer or two at "Barasti". it's a great bar at the beach with great crowd. Sam. Edited September 30, 2015 by Sam Kashefi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.