joinwooHK Posted December 1, 2015 Report Share Posted December 1, 2015 I am setting my nomad 10 , i can successful sending audio via zax net , but not the timecode . Could anyone give me a tips on that? i have read the manual and set step by step, But .... Quote Link to comment Share on other sites More sharing options...
greg sextro Posted December 1, 2015 Report Share Posted December 1, 2015 Have you tried contacting Zaxcom? are you sure your ERX is a model that supports TC? Can you see TC on the display but are not getting it output from the receiver. Have you set your output settings correctly. Have you checked that both the TC settings on the Nomad and ERX are the same. Have you adjusted the output voltage of the ERX? Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted December 1, 2015 Report Share Posted December 1, 2015 Greg -- You've found one of the many duplicate threads that the OP started. Jeff deleted most of them but must have missed this one. In the original thread the OP said he got it working. All good suggestions, of course -- they may help someone else. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.