Over06 Posted February 11, 2016 Report Share Posted February 11, 2016 Hi, I'm new on this forum and I hope we'll can share ideas. I've a problem. I have to powering a Sennheiser SK 100 G3 transmitter via the Sennheiser DC2 power converter original part. I need a 220VAC input to 6-18VDC output power converter the smallest possible. I've to be sure this power converter will not generate crackling or interference to the lavalier microphone I'll connect on the transmitter. All your advices are welcome. Thanks. Regards. Quote Link to comment Share on other sites More sharing options...
berniebeaudry Posted February 11, 2016 Report Share Posted February 11, 2016 Just did a quick Google search and turned up this site: http://www.elliottelectronicsupply.com/power-supplies/ac-dc-wall-types.html Lots of choices. If you're using this in a sound bag just power it directly off of a good lithium ion battery, or off of the same battery that's powering your bag via a battery distribution system. Quote Link to comment Share on other sites More sharing options...
Over06 Posted February 11, 2016 Author Report Share Posted February 11, 2016 Thanks for your advice but I need absolutly to use a 220VAC input to 6-18VDC output power converter. Senheiser transmitter will be powered 24/7. Quote Link to comment Share on other sites More sharing options...
Mark Vesterskov Posted February 12, 2016 Report Share Posted February 12, 2016 I bet that you already have on laying around from an old router, set-top-box or whatever - i have a whole box full of them, from tiny (and not very powerful) to huge iron-core transformers capable of supplying 5 amps. Anything should go with the DC-2. Quote Link to comment Share on other sites More sharing options...
Rick Reineke Posted February 12, 2016 Report Share Posted February 12, 2016 Just about any wall-wart in your country that supplies 6-18VDC should work with the DC-2. I do not know the amperage requirement but it can't be much. 250mA should be adequate I would think. In any case, low cost and small. You will probably have to splice the cables together or install the appropriate jack but that's easy with even minimal soldering skills. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.