Matthew Sonnenfeld Posted April 14, 2016 Report Share Posted April 14, 2016 1 minute ago, Tom Duffy said: With 24 repetitions of the inventor's name in the press release, I think it's safe to say this is an officially licensed implementation, rather than a freebee from the expired patent. Nice show of respect. Agreed. Dan Dugan himself is in the launch video. Quote Link to comment Share on other sites More sharing options...
joinwooHK Posted April 15, 2016 Report Share Posted April 15, 2016 I hope there is small lithium battery can be added to TRX , as back up power , just hold for few minute until we can have the battery swap in some critical situation . Quote Link to comment Share on other sites More sharing options...
Frosty Horton Posted April 15, 2016 Report Share Posted April 15, 2016 Come by our Remote Audio booth at NAB C7140 and see what we're showing. (Hint: New Products!) Quote Link to comment Share on other sites More sharing options...
johnpaul215 Posted April 15, 2016 Report Share Posted April 15, 2016 https://zaxcom.com/zaxcom-announces-new-high-density-wireless/ New ZHD wireless from Zaxcom waterproof? built like a tank? I wish they were waterproof. Otherwise, they're very durable. One of mine has seen some pounding (motorcycle accident etc) and is still 100% functional. Just a scratch on the case. Quote Link to comment Share on other sites More sharing options...
Solid Goldberger Posted April 15, 2016 Report Share Posted April 15, 2016 The permeability of the Zaxcom screens to moisture (SWEAT) is the thing I like the least about zax gear. I wish they would have addressed that on the TRX3 generation. E. Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted April 15, 2016 Report Share Posted April 15, 2016 never had problems with sweat and screens. Quote Link to comment Share on other sites More sharing options...
DanieldH Posted April 15, 2016 Report Share Posted April 15, 2016 Dream: A cheap frame system for lee filter style lighting foils that avoids wind noise Quote Link to comment Share on other sites More sharing options...
Solid Goldberger Posted April 16, 2016 Report Share Posted April 16, 2016 6 hours ago, RadoStefanov said: never had problems with sweat and screens. Have had two transmitters fail in the past 3 months with sweat damage. E. Quote Link to comment Share on other sites More sharing options...
Constantin Posted April 16, 2016 Report Share Posted April 16, 2016 Another dream: recorder that can load and run VST plug-ins (or other format), for EQ, compressor, delay, whatever... Mix track only, of course. Or maybe selectable to either mix only, headphones only, or both. Parameters get stored in metadata Quote Link to comment Share on other sites More sharing options...
resonate Posted April 16, 2016 Report Share Posted April 16, 2016 12 hours ago, Solid Goldberger said: The permeability of the Zaxcom screens to moisture (SWEAT) is the thing I like the least about zax gear. I wish they would have addressed that on the TRX3 generation. E. yes, heard that from the peeps that were using zaxcom wireless for feature productions in Poland....i don't understand. Why don't compete stronger, and have a better product? 12 hours ago, RadoStefanov said: never had problems with sweat and screens. Maybe in hot Nevada climate it does not matter, but we have a lot of moisture in Europe, as I am sure you remember 2 hours ago, Constantin said: Another dream: recorder that can load and run VST plug-ins (or other format), for EQ, compressor, delay, whatever... Mix track only, of course. Or maybe selectable to either mix only, headphones only, or both. Parameters get stored in metadata I like the idea as far as separate track parameters for mix tracks (you can assign which are mix tracks, and have separate compression, eq, filters - hello Howard!) but VST - no thanks too many crashy plugins out there. Quote Link to comment Share on other sites More sharing options...
Nathaniel Robinson Posted April 16, 2016 Report Share Posted April 16, 2016 4 hours ago, Constantin said: Another dream: recorder that can load and run VST plug-ins (or other format), for EQ, compressor, delay, whatever... Mix track only, of course. Or maybe selectable to either mix only, headphones only, or both. Parameters get stored in metadata Mix automation data is a dream of mine as well. I'm also ready to see rotary encoders instead of potentiometers on my digital mixers. Easy to work in banks/pages without any mechanical recall necessary. Would love to see more "meter bridge" type functionality in field recorders, whether wireless or even via a hard wired video output. Quote Link to comment Share on other sites More sharing options...
daniel Posted April 16, 2016 Report Share Posted April 16, 2016 Waveform meters on recorders with big touch screens. A bit like X3 but more extensive. Eg. An option to display all channels with an adjustable time frame. Maybe even a semi automatic way of mixing by touching a given waveform as or before it gets to the 'mix' head and therefor after it (the iso) has been recorded - I've probably not explained this well. Quote Link to comment Share on other sites More sharing options...
Constantin Posted April 16, 2016 Report Share Posted April 16, 2016 6 hours ago, resonate said: I like the idea as far as separate track parameters for mix tracks (you can assign which are mix tracks, and have separate compression, eq, filters - hello Howard!) but VST - no thanks too many crashy plugins out there. Doesn't need to be VST, that was just an example, could be whatever, something new, or pre-approved by manufacturer, a new open standard, just not proprietary Quote Link to comment Share on other sites More sharing options...
Wandering Ear Posted April 16, 2016 Report Share Posted April 16, 2016 For several years now I have been putting trx's in the pockets of construction workers working outside in the rain in Seattle, without a failure yet (knock on wood). I'm excited to see what Zaxcom has come up with for a backpack rig, this is something I have wanted for years, and other mixers I know have dreamed about before me. I currently have a project that I would love to see a small, 16 fader, digital console with Dante inputs, no analog ins, and 6 analog outs, under 10 lbs. Basically a monitor mixer, small and light with good sounding channel fx. I would also welcome a field recorder with short linear faders instead of rotary encoders, like the Cantar but more bag friendly (all controls on the face). Quote Link to comment Share on other sites More sharing options...
Ze Frias Posted April 16, 2016 Report Share Posted April 16, 2016 12 minutes ago, Wandering Ear said: I currently have a project that I would love to see a small, 16 fader, digital console with Dante inputs, no analog ins, and 6 analog outs, under 10 lbs. Basically a monitor mixer, small and light with good sounding channel fx. I've been dreaming about this for a while now. Don't forget DC power input (instead of AC). I wouldn't mind a few analog inputs though. Quote Link to comment Share on other sites More sharing options...
Wandering Ear Posted April 16, 2016 Report Share Posted April 16, 2016 2 minutes ago, Jose Frias said: I've been dreaming about this for a while now. Don't forget DC power input (instead of AC). I wouldn't mind a few analog inputs though. Yes, forgot to mention DC power. Right now I'm hauling around an 01v as a monitor mixer, and it's way more than needed. I could see a couple analog ins, would need a slate / talkback mic too. For my use the analog inputs are done elsewhere, I just want it small and light. Quote Link to comment Share on other sites More sharing options...
Shastapete Posted April 16, 2016 Author Report Share Posted April 16, 2016 6 minutes ago, Jose Frias said: I've been dreaming about this for a while now. Don't forget DC power input (instead of AC). I wouldn't mind a few analog inputs though. José, I know you can't talk, but blink twice if Zaxcom is coming out with a new Cameo LRC. Quote Link to comment Share on other sites More sharing options...
Ze Frias Posted April 16, 2016 Report Share Posted April 16, 2016 Just now, Wandering Ear said: Yes, forgot to mention DC power. Right now I'm hauling around an 01v as a monitor mixer, and it's way more than needed. I could see a couple analog ins, would need a slate / talkback mic too. For my use the analog inputs are done elsewhere, I just want it small and light. Same here, really. I just can't help but think that I may need to have at least one or two analog inputs, just in case.... :/ Quote Link to comment Share on other sites More sharing options...
KGraham045 Posted April 16, 2016 Report Share Posted April 16, 2016 14 hours ago, Solid Goldberger said: Have had two transmitters fail in the past 3 months with sweat damage. E. I've had the same issue Quote Link to comment Share on other sites More sharing options...
Shastapete Posted April 16, 2016 Author Report Share Posted April 16, 2016 We already know they had plans to have a digital mixer only option with the Deva 32. They've since scrapped the Deva 32 for a Deva 24 recorder, but in the Gotham NAB 2016 teaser there is something mixer like sitting on the table. Quote Link to comment Share on other sites More sharing options...
Wandering Ear Posted April 16, 2016 Report Share Posted April 16, 2016 3 minutes ago, Jose Frias said: Same here, really. I just can't help but think that I may need to have at least one or two analog inputs, just in case.... :/ That would be smart, and the mixer would be more versatile that way. If I found this though, I would then just be wishing my wireless receivers had Dante outputs too. Quote Link to comment Share on other sites More sharing options...
Ze Frias Posted April 16, 2016 Report Share Posted April 16, 2016 Just now, Shastapete said: We already know they had plans to have a digital mixer only option with the Deva 32. They've since scrapped the Deva 32 for a Deva 24 recorder, but in the Gotham NAB 2016 teaser there is something mixer like sitting on the table. It's the mixer panel for the Deva 24. Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted April 16, 2016 Report Share Posted April 16, 2016 Some very cool things coming from MozeGear as well. Check them out. Quote Link to comment Share on other sites More sharing options...
VASI Posted April 16, 2016 Report Share Posted April 16, 2016 From Ambient http://us7.campaign-archive1.com/?u=a5c8c41b48e44af5ec2ed1679&id=78ee474684&e=fa0702bd07 Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted April 16, 2016 Report Share Posted April 16, 2016 Interested in any reports on the new Mozie stuff! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.