knod Posted June 17, 2016 Report Share Posted June 17, 2016 text.txt Quote Link to comment Share on other sites More sharing options...
knod Posted June 17, 2016 Author Report Share Posted June 17, 2016 Can anyone confirm that the pins number 1&4 in the hirose connector of XL-WPH3 are parallel connected with 2&3? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
RPSharman Posted June 17, 2016 Report Share Posted June 17, 2016 On 744t, 1&2 are combined and 2&3 are combined if you want the charger (or cable) to charge the on board battery. Otherwise, you only want to build the Hirose with 1 & 4. I believe on all other machines it doesn't matter, as pins 2&3 don't go anywhere inside the machine. I have spoken to SD in the past, and seem to recall the power supplies combine 1&2 and 3&4 in case they are used with 744T, but I can't be sure. Quote Link to comment Share on other sites More sharing options...
nickreich Posted June 20, 2016 Report Share Posted June 20, 2016 702s and 722s are the same re pin 2&3 required for charging. Don't know about 788. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.