Jump to content

Shure WL185


Prahlad Strickland

Recommended Posts

http://www.shure.com/americas/products/microphones/other/wl185-lavalier-condenser-microphone#details

Anyone know if this would work with the zaxcom TRX900LA2?    I need to run it for a speech and don't want to have to notch filter the hell out of my omni mic's like i've done in the past.   

thanks heaps 

Prahlad

Link to comment
Share on other sites

  • 3 years later...
  • 2 years later...

I'm trying to find a wiring diagram for these WL183/184/185 lavs with Zaxcom Lemo3 (TRXLA 3.3v).

 

Shure's Lemo3 wiring leaves the mic with quite a bit of hiss/noise floor (too much in my opinion). 
 

To connect a Shure lapel mic (e.g., WL183) or headworn mic (e.g., WBH53) to the Shure WA336 Lemo 3 connector:

  • Shure black wire (audio) and Shure cable shield (ground) to Lemo pin 1
  • Shure red wire (bias) to Lemo pin 3


 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...