Jeremiah Sheets Posted November 26, 2016 Report Share Posted November 26, 2016 I'm wondering how to update firmware on the SRc as well as the LT. Thanks. Quote Link to comment Share on other sites More sharing options...
ryanpeds Posted November 26, 2016 Report Share Posted November 26, 2016 I'm pretty sure you have to send them back to lectro to have firmware updates done. Quote Link to comment Share on other sites More sharing options...
Jeremiah Sheets Posted November 26, 2016 Author Report Share Posted November 26, 2016 This is what I figured, but I thought I recalled seeing what looked like a USB port on some of the units. Quote Link to comment Share on other sites More sharing options...
Stillweii Posted November 27, 2016 Report Share Posted November 27, 2016 The manual for the LT says you need a windows machine. Manuals = great shitter material Quote Link to comment Share on other sites More sharing options...
Steve Foy Posted November 27, 2016 Report Share Posted November 27, 2016 Not sure about Src but have LT/LR can be done via USB port.......... updates and updater available at Lectro website. 2 minutes ago, Stillweii said: The manual for the LT says you need a windows machine. Manuals = great shitter material There is a Mac version of the updater now too Quote Link to comment Share on other sites More sharing options...
Paul Katzman Posted November 27, 2016 Report Share Posted November 27, 2016 I hope they add some way to USB firmware updates on an SRc, maybe a special back plate? Quote Link to comment Share on other sites More sharing options...
kosty Posted November 27, 2016 Report Share Posted November 27, 2016 Isn't it possible to update the fw on the SRc with LectroLink anymore, like on the SRa and SRb ? Quote Link to comment Share on other sites More sharing options...
Dejan Ceko Posted November 28, 2016 Report Share Posted November 28, 2016 http://www.lectrosonics.com/Support/Table/Wireless-Firmware-Current-Products/Receivers/ Created: 13 April 2016 SRc Firmware Revision History This model is not capable of firmware updates in the field so no files are available for download. Contact Lectrosonics if you need a firmware update. SRc v1.07 - 20 September 2016 When the BACK button is used to stop a scan in progress, the first receiver's channel is now properly restored to its pre-scan value. In the receiver tuning pages, Menu+Up and Menu+Down now adjust the frequency by 1.6 MHz (a single hex code digit, the same as the SRB) instead of 6.4 MHz (four hex code digits, as with earlier versions of SRC firmware). SRc v1.06 - 22 June 2016 Fixed a bug (affecting A1 band units only) wherein the Smart Tune function didn't always choose the quietest frequency. Periodic information messages like "check frequency" no longer interrupt Tune or Scan functions. Single step tuning in user group entry mode (for groups U and V) now consistently conforms to the selected step size, instead of sometimes permitting 25 kHz steps when the 100 kHz step size was selected. SRc v1.05 - 07 April 2016 First production release. Quote Link to comment Share on other sites More sharing options...
ProSound Posted November 28, 2016 Report Share Posted November 28, 2016 You can update any Lectrosonics SR , SRA, SRB or SRC with the Lectro Link you just need the firmware file. Quote Link to comment Share on other sites More sharing options...
Jeremiah Sheets Posted November 30, 2016 Author Report Share Posted November 30, 2016 Hmm... I'm curious why Lectrosonics says it cannot be performed in the field. Whitney, have you tried this with the SRc? Quote Link to comment Share on other sites More sharing options...
ProSound Posted December 1, 2016 Report Share Posted December 1, 2016 6 hours ago, Jeremiah Sheets said: Hmm... I'm curious why Lectrosonics says it cannot be performed in the field. Whitney, have you tried this with the SRc? No But on the website it says you cannot field update SR or SRB which is not correct if you have the Lectro Link update interface ( Which I own) you just need the right HEX file to do the update. Quote Link to comment Share on other sites More sharing options...
Hugh Palmer Posted December 1, 2016 Report Share Posted December 1, 2016 Anybody have a link or source for this lectro-link interface? I can't find any information online. Quote Link to comment Share on other sites More sharing options...
ProSound Posted December 1, 2016 Report Share Posted December 1, 2016 Any Lectro dealer should be able to get one for you. You need a PC the correct HEX file and the update Utility. You remove the cover on SR and plug in a special cable then update. You can also update a few other products too but not all of them I have had for many years http://www.pro-sound.com/p/lectrosonics-lectrolink-firmware-adapter-and-freq-utility-tool.html Quote Link to comment Share on other sites More sharing options...
Jeremiah Sheets Posted December 3, 2016 Author Report Share Posted December 3, 2016 Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.