Jump to content

MICRON TX501 and RODE lav connection


Matti

Recommended Posts

I have this old Micron tx 501 with a Sony mic but as the Sony is so big to hide I think I would like to change it to a RODE one as can change the cable with those so I can use it with Micron with its own cable.

Now you older professionals might remember how to connect this combination. Tried the same as with Sony and didn´t get it working  so I put the Sony back. The Rode cable is a nightmare to solder with bad eyesight at least...

As a retired sound guy this is more or less for hobby, but if someone can help I would be very thankfull!

Matti

 

forShare (1).jpg

Link to comment
Share on other sites

Yes, I have been in contact with them but it seems their suggestions dont work here.

I tried 2 connections: 2 wired TRAM and

TRIM but but didn't succeed and got tired

and connected back Sony -the same as 2 wired TRAM. The Rode cable is really difficult to solder but I measured my conn.

and they seemed ok except no signal from the Micron. I'll have to try again some other time...

Thanks

 

Matti

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...