Eric Toline Posted February 4, 2017 Report Share Posted February 4, 2017 9 hours ago, chrismedr said: Eric, I've heard that the COS-11 cable is really difficult to solder, does this match your experience? I'm asking because I could get the PT version quite a bit cheaper then with a connector, but my solder skills are just about average. chris COS-11's are just about the most difficult lavs to solder. The individual leads are extremely thin and have no stability to stay in place. It's the perfect self torment for masochists. Quote Link to comment Share on other sites More sharing options...
resonate Posted February 7, 2017 Report Share Posted February 7, 2017 On 2.02.2017 at 11:11 PM, Matthias Richter said: it does help for sure. I hear it 😉 It's just that I can only do 180' whereas in post they can slip by the frame. you can slip by frame down to sample in pro tools, and you can see it, too. I don't sweat it. It's easy enough to line up the phase in pro tools if you know what you're doing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.