designali Posted March 8, 2017 Report Share Posted March 8, 2017 Hi all, after we received a lot of feedback regarding our original ERX holder, we've chosen to split the functionality. We are now offering 2 different versions of the Stingray ERX Holder: KSERX2 (for mounting only) features a removable ¼-20 threaded insert and Velcro backing KSERX3 (for wearing only) features a swivel belt clip So, if you are planning to hand your ERX to the Director use the KSERX3. If you're planning to mount your ERX to a camera use the KSERX2's Velcro to stick it to the back of the monitor or a magic arm via the 1/4-20 insert. The Silicone Holder remains unchanged and still offers additional protection for your investment; the oversized top lip protects against accidental bumping of the knob/switch. Both KSERX2 and KSERX3 have a Listprice of $40 and should sell in the US for $38. They are available now! Call your local K-Tek dealer or check it out on our Webpage at: https://ktekpro.com/product-category/audio/audio-accessories/ Ali ali@ktekpro.com Quote Link to comment Share on other sites More sharing options...
Glen Deakin Posted March 23, 2017 Report Share Posted March 23, 2017 Looks good. How about a case for the zaxcom 742 ? Quote Link to comment Share on other sites More sharing options...
designali Posted April 18, 2017 Author Report Share Posted April 18, 2017 Thanks for the suggestion... we'll be putting our thinking cap on ;-) Quote Link to comment Share on other sites More sharing options...
azw Posted May 31, 2017 Report Share Posted May 31, 2017 Hey K-Tek: I bought two of the ERX holders with the velcro and 1/4-20 inserts. I have to say, they do not perform as well as I had hoped. 1. Velcro is soft side. Every camera I encounter has soft side on them - in general anything sticking to the camera (TC, IFB) needs to have HARD SIDE velcro on them. Can this be changed? It's unusable as-is this way. 2. The 1/4-20 insert moves around a lot. It is not "solid" - you can rotate the case, so when it is attached to the mount, it still moves back and forth. I think I need to tape it down or something.... Not what I had hoped for. Any suggestions on how to make this better? Avi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.