Stef Albertyn Posted April 28, 2017 Report Share Posted April 28, 2017 I have a small metal or plastic part that has come loose inside a ccm mic. It is working fine otherwise - I need to get through the day - can someone explain to me how to take the mic apart and take the bit out - it will obviously go back to Schoeps - but just need to take the bit out so I can get through the day Thanks stef Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted April 28, 2017 Report Share Posted April 28, 2017 Contact Redding Audio (US Schoeps distributor) at 203-269-1808. Scott, or someone else who might know, may not be back from the NAB Show yet. They might be able to have someone call you, though. ...I see after I wrote that, you're in S.A. An email to Redding might also help -- it's worth a try. Quote Link to comment Share on other sites More sharing options...
Stef Albertyn Posted April 28, 2017 Author Report Share Posted April 28, 2017 Thank you John! Once I got to the set and inspected the mic, it was evident that the "innocent" boomswinger banged the mic very hard - so it is being shipped to its maker. Thank you for the valuable information and the trouble to reply to my call for help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.