Rafael Posted May 20, 2017 Report Share Posted May 20, 2017 Hi one question about mic plexer 2 can I set the variable filter to use it with 2 QRX200 one High (trxla2.5s) and one low (2 zmt3.6) ? is it possible ? make sence ? thanks Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted May 21, 2017 Report Share Posted May 21, 2017 Only if the frequencies are within a 35mHz window -- not too likely in this case. Quote Link to comment Share on other sites More sharing options...
Rafael Posted May 21, 2017 Author Report Share Posted May 21, 2017 OK the manual said the" V filter will also allow the MicPlexer2 to cross blocks" can cross block 23 / 24 HI/low or I'm wrong ? thanks for your help Quote Link to comment Share on other sites More sharing options...
Jack Norflus Posted May 21, 2017 Report Share Posted May 21, 2017 There is an 18 Mhz overlap between 596 and 614. Plus as long as the other frequency is with in 35Mhz of the first one you would be ok. Quote Link to comment Share on other sites More sharing options...
PTA Posted May 21, 2017 Report Share Posted May 21, 2017 I think it would be awesome if the next version of the micplexer had two filters in it so they could be used in different blocks if one wanted to do so. Quote Link to comment Share on other sites More sharing options...
Bash Posted May 22, 2017 Report Share Posted May 22, 2017 1 hour ago, PalmerT said: I think it would be awesome if the next version of the micplexer had two filters in it so they could be used in different blocks if one wanted to do so. so it would probably cost twice as much !!!! Quote Link to comment Share on other sites More sharing options...
Rafael Posted May 22, 2017 Author Report Share Posted May 22, 2017 thanks all. the block 23 on micplexer2 it's on position 3, 582.5-617.5 center freq 600Mhz on my QRXs scan limit 590-614 should I think on a block 23 micplexer1? what do you recommend for run 4 systems ? on xr or stereo or mono (400Khz spacing) I'm used to work on quiet rf environment . plexer 1 or 2 ? can't find plexer1 user manual the best Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted May 22, 2017 Report Share Posted May 22, 2017 I'm confused as to why you're confused. The Micplexer has a 35mHz receiving window. With the original Micplexer, each unit was designed for a specific Zaxcom block. With the Micplexer 2, you can adjust it for which block you want, or you can tune a 35mHz receiving window between blocks if you wish. FWIW, here is some info on the original Mixplexer: https://zaxcom.com/products/micplexer/ Quote Link to comment Share on other sites More sharing options...
Rafael Posted May 22, 2017 Author Report Share Posted May 22, 2017 thanks ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.