Jump to content

Mic plexer 2


Rafael

Recommended Posts

1 hour ago, PalmerT said:

I think it would be awesome if the next version of the micplexer had two filters in it so they could be used in different blocks if one wanted to do so. 

so it would probably cost twice as much !!!!

Link to comment
Share on other sites

thanks all.
the block 23 on micplexer2 it's on position 3, 582.5-617.5 center freq 600Mhz
on my QRXs scan limit  590-614
should I think on a block 23 micplexer1? what do you recommend for run 4 systems ?
on xr or stereo or mono (400Khz spacing) I'm used to work on quiet rf environment .
plexer 1 or 2 ?

can't find plexer1 user manual

the best

 

 

Link to comment
Share on other sites

I'm confused as to why you're confused.  The Micplexer has a 35mHz receiving window.  With the original Micplexer, each unit was designed for a specific Zaxcom block.  With the Micplexer 2, you can adjust it for which block you want, or you can tune a 35mHz receiving window between blocks if you wish.

FWIW, here is some info on the original Mixplexer:

https://zaxcom.com/products/micplexer/

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...