johngooch Posted July 21, 2017 Report Share Posted July 21, 2017 I am constantly switching back and forth( trying to save back trauma ) between my 633 and 688/SL-6 setup. This requires me to continually remove/install the bottom plates of my SRs. I remember seeing awhile back some pictures of some really nice bags equipped with SRs with Uni plates installed with DB-25 connectors. I would like to have made up some breakout cables for my SRs with their uni/superslot plates so that i do not have to change plates so often. Anybody here do that? Also thinking of having joeco multipin I/O cables made up as well... thanks! j Quote Link to comment Share on other sites More sharing options...
boomsound Posted August 3, 2017 Report Share Posted August 3, 2017 I remember as well and I would be interested in buying some also. Anyone? Quote Link to comment Share on other sites More sharing options...
TomBoisseau Posted August 14, 2017 Report Share Posted August 14, 2017 I built this a couple years ago. It's not as pretty as a lot of other's work here, but it does exactly what I needed, and seemingly what you need to do. There is a small coaxial power input on the bottom of the project box that is feed from a Trew Audio NP1 cup, thus this contraption also serves as a "power distro", howbeit without and electronics or isolators, only a fuse. And lest you scold me, the power switch has a locking mechanism, so its not going accidently turn off. None the less it has worked well using not only the Lectros, but also in powering a couple Sennheiser G3's. Tom Quote Link to comment Share on other sites More sharing options...
100sideprojects Posted August 16, 2017 Report Share Posted August 16, 2017 That's a pretty sweet build Tom. Nice work! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.