Jump to content

signal amplification


Alexander Romanov

Recommended Posts

9 hours ago, Alexander Romanov said:

use

 

9 hours ago, Alexander Romanov said:

Hello everyone from Moscow, this fantastic forum thanks for him,
  I want to add antennas to my bag, I use Mini-Circuits ZFSC - 8-43 and PSC PERIODIC ANTENNA, how long should the cable from the antenna be so as not to use the ufm 230 amplifier?

Jason is correct as far as cable goes. In fact 30 feet of RG-58 has about 2.5 dB of loss which is small enough to not need an Amp. However, the splitter is 8 way giving you about 9 to 10 dB of loss for each output. That is, the antenna signal is divided by 8 for each output plus a little more. The ufm230 can make up this considerable loss if you are trying to work longer distances. Set the ufm230 gain to just make up for the 10dB of loss. Ideally the amp would be at the antenna but 10 feet of cable from the antenna to the amp input is perfectly ok.

Best,

LarryF

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...