Erob Posted October 28, 2017 Report Share Posted October 28, 2017 Hey everyone, So I just upgraded from G3's to some Lectrosonic SSM's and SRc receivers, I went with the SREXT back plate to power my units. However, given this is the first piece of high end gear I've purchased I was unaware that the SREXT's included "power cable" only had connections at one end and had bare wiring on the other. I have a BDSv4U to power them off of a NP-1 battery, but I'm not entirely sure what to do about the power cable. I can't seem to find the correct connection for the BDS and want to make sure I get the right one before I go slapping on the wrong one. I just did a quick search on B&H and found these but I'm not 100% sure that it will work with the SRc receivers and the BDS. Any and all feedback is welcome here! Thanks! Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted October 28, 2017 Report Share Posted October 28, 2017 Call a proper location sound dealer and they will fix you up. Quote Link to comment Share on other sites More sharing options...
Mobilemike Posted October 28, 2017 Report Share Posted October 28, 2017 There's also this thread with some good info: -Mike Quote Link to comment Share on other sites More sharing options...
Matt Mayer Posted October 29, 2017 Report Share Posted October 29, 2017 IIRC, It's a Switchcraft 761K. Long shank, 2.5mm inner diameter Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.