Jump to content

Custom low profile right angle plugs - Seen this?


Ty Ford

Recommended Posts

1 hour ago, Ty Ford said:

Or do you enjoy making 'em yourself?

 

I wouldn't say I enjoy it… 

 

I cheated and took the easy way out when I made my bag jumpers- I used Neutrik XLRs and just cut the boot off the retaining nut. The nut still closes the collet to secure the cable, and the overall length is about 1/2" shorter. That allows enough room for the cable to turn without being pressed up against the side of the bag.

 

It's fine for my needs, and was way less work than cutting the threads off the shell.

Link to comment
Share on other sites

for $10 a connector it certainly wins the cost vs. labor debate. The current $20 connectors were too much in my opinion. I've heard rumors that new mini connectors were coming from Cable Techniques, and now that they are here I'll be getting a couple to replace the "good enough" DIY monstrosities in my kit.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...