mrkva Posted April 5, 2018 Report Share Posted April 5, 2018 Dear all, I'd like to introduce my company named LOM. We are based in Slovakia and we manufacture various microphones and electromagnetic listening devices. You can check our current microphone range on our web store: https://lom-label.myshopify.com/ Let me know if you have any questions! Regards, Jonas Gruska Quote Link to comment Share on other sites More sharing options...
MattiaCellotto Posted April 7, 2018 Report Share Posted April 7, 2018 Had the chance to use LOM mics a year ago and the quality was amazing, plus the products all do something quite unique! Quote Link to comment Share on other sites More sharing options...
mrkva Posted April 9, 2018 Author Report Share Posted April 9, 2018 Thanks Mattia! Appreciate your feedback! There was one more post here I wanted to responed to but can't find it now. Strange. Quote Link to comment Share on other sites More sharing options...
DanieldH Posted April 10, 2018 Report Share Posted April 10, 2018 On 9.4.2018 at 11:47 AM, mrkva said: There was one more post here I wanted to responed to but can't find it now. Strange. That was me. I deleted it, as I was not sure if my questions made sense at all as I understood at that time. First of all, I'd like to express, that it seems kinda cool what you do (and that what you offer is too low to play around what it is useful for... um I haven't said this ;-) ). However this is a rather professional users forum in a niche environment of audio production, as you probably know. The humble question is, how can your products be adapted in our world? So do I understand the following correctly? The Uši/Ucho have a TA3 connector (aka miniXLR); Uši refers to a matched pair of Uchos; Uši is Slovak for ears, Ucho for louse; They operate unbalanced on a 2-10V bias voltage, one pin is blind. The Pro versions come with a cable that goes to some PCB board, fitted in a regular XLR(M), hosting an electronic balun circuit. This cable does more or less a comparable job of lets say a DPA DAD6001-BC or an Ambient EMPXLR or maybe a Schoeps CCM cable. If I understood relevant parts of the above correctly: Could you describe your matching process? What is your pin assignment on the TA3 mic side? Will (pre) orders be accepted for cable-less Uši/Ucho only on your webshop? All the best Daniel Quote Link to comment Share on other sites More sharing options...
mrkva Posted April 17, 2018 Author Report Share Posted April 17, 2018 Hey there Daniel, thanks for the feedback! On 10/04/2018 at 10:27 PM, DanieldH said: So do I understand the following correctly? The Uši/Ucho have a TA3 connector (aka miniXLR); Uši refers to a matched pair of Uchos; Uši is Slovak for ears, Ucho for louse; They operate unbalanced on a 2-10V bias voltage, one pin is blind. Correct. On 10/04/2018 at 10:27 PM, DanieldH said: The Pro versions come with a cable that goes to some PCB board, fitted in a regular XLR(M), hosting an electronic balun circuit. This cable does more or less a comparable job of lets say a DPA DAD6001-BC or an Ambient EMPXLR or maybe a Schoeps CCM cable. Correct. Fully balanced, impedance matched output using matched pair of transistors. On 10/04/2018 at 10:27 PM, DanieldH said: Could you describe your matching process? I use calibrated and certified 1kHz 94dB SPL generator with adaptors (out mics are made to fit 1/2" and 1/4" size standards) and match microphone sensitivities to +/-0.1 dB at same room temperature and humidity. I just purchased a Earthworks M30 microphone with its own calibration file for more precise freq. response measurements (upon request and for internal design purposes). On 10/04/2018 at 10:27 PM, DanieldH said: What is your pin assignment on the TA3 mic side? 1 – GND, 2 – signal + power, 3 – NC On 10/04/2018 at 10:27 PM, DanieldH said: Will (pre) orders be accepted for cable-less Uši/Ucho only on your webshop? For the moment I can do it as a custom order only. I have a plan to adapt the mikroUsi microphone line for the pro-location world – making custom versions with locking minijack, TA3, lemo – whatever required for use with wireless transmitters. Right now those can be ordered too via custom order. Best place to get a quote on those is here: support@lom.audio Small addition – we just announced a result of our collaboration with Rycote – Usi microphone mount: https://lom-label.myshopify.com/collections/microphones-accessories/products/rycote-usi-mount Hope that helps! Jonas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.