Rawturnip Posted April 13, 2018 Report Share Posted April 13, 2018 Hey Guys, what do I need to utilise Shark Fin Antennas from my bag/cart? I run 3 Micron Explorers and want to increase the range. I've seen passive and active antennas and also distribution units. I need a simple straightforward solution please. P. Quote Link to comment Share on other sites More sharing options...
Pontec Posted April 13, 2018 Report Share Posted April 13, 2018 Hi, I also have some Microns (SDR550). I use Zaxcom Bluefin passive antennas, and ZFSC-4-1 SMA passive splitters on each antenna. There is about 6dB RF attenuation on each output but Bluefins have +8dB gain. This substantially increases my range for a reasonable cost. Active antennas & distribution are much more expensive, but not very useful in my case as long as I can keep my antennas near my recorder (coax cable lenght < 2m , rf loss is not significant). I hope this helps, Tristan Quote Link to comment Share on other sites More sharing options...
Mark LeBlanc Posted April 14, 2018 Report Share Posted April 14, 2018 I Have two sets of Microns for my Boom Ops. I use the PSC SMA antenna splitter and have had excellent results. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.