Bartek Posted March 16, 2007 Report Share Posted March 16, 2007 hello, My St-s has a routing matrix that has post fader sends. I cant afford to let go of the mixer for a few weeks to have sent in. Does anyone know If modifying this to pre fade mode is a major "surgery" or a simple job? Quote Link to comment Share on other sites More sharing options...
robaudio Posted March 16, 2007 Report Share Posted March 16, 2007 I have the same matrix and had it modified by my local repair guy. Picked it up in a couple of days. The hardest problem was the lack of space for extra wiring. I kept Ch. 1 post and had the others switchable. Rob Y. Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted March 16, 2007 Report Share Posted March 16, 2007 I'd ask Adam Liberman (Liberman Sound) 510 526-5447) about this--he's done quite a lot of custom work on Sonosax mixers. Philip Perkins Quote Link to comment Share on other sites More sharing options...
imagist Posted July 31, 2007 Report Share Posted July 31, 2007 I know this is an old thread but I'm just curious about which Sonosax mixer is being referred to as the 'st-s'. As I understand it with the SX-S the choice of whether direct outs are pre or post fader is made in the wiring of the external jack (is this after a certain serial no.?) and for the SX-ST by switch on the top panel. Is that right? I'm wondering what an st-s is please? Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.