Ross Collier Posted September 10, 2011 Report Share Posted September 10, 2011 I've recently purchased an old Micron VHF transmitter and 2 receivers, which I'm using as an IEM system. I've spoken with Tanky at Micron and he's managed to get the pin wiring for the transmitter but hasn't had any luck with the receivers yet Do any of you know the pin wiring for the SR120.1 and the SR620.3? Thanks in advance. Ross Quote Link to comment Share on other sites More sharing options...
r.paterson Posted September 10, 2011 Report Share Posted September 10, 2011 hello pin 7 micron numbering style on receiver is headphone/line level out, controled by the small pot on receiver, pin 5 and 6 is earth. richard Quote Link to comment Share on other sites More sharing options...
dudsound Posted September 11, 2011 Report Share Posted September 11, 2011 Hi Ross I use VHF Microns as camera links with the SDR receivers, but I also use an SR receiver on a duplicate frequency as a headphone feed. I'm surprised that Tanky couldn't find the wiring configuration but Better Sound Ltd, (0207 482 0177), still hire out a lot of Micron gear and have in the past supplied all sorts of MIcron specific leads including headphone outputs, so they would know what's what and may even have a couple of these leads tucked away as they are not for current models. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.