.png.279748a58a2b862b7aa5f3b84126e232.png)
Manufacturers & Dealers
a place for equipment manufacturers, sales and rental dealers serving our industry
Rules & Guidelines
The Manufacturers & Dealers section should not be used for advertising and promotions but may be used by all the "usual suspects" for information and announcements for events, seminars and things like that. Just use your good judgement and be respectful of the core purpose of this Discussion Group. Premium Ad Space is now available for those who wish to have advertising displayed on the site. Advertising and announcements of new products should be confined to simple description and link to company website.
896 topics in this forum
-
- 0 replies
- 785 views
I don't know how many Video playback engineers there are on JW Sound, bit if you are called upon to do any 24 frame Video playback or poor man's ADR Video playback on set you might be interested in this thread. I have worked as an audio and video engineer in the Television and Film industry for over 50 years and now it comes time (in my semi-retirement) to share a bit of the technology and tools that I have created for my own personal use over the last couple of decades. I have gathered together a handful of my most useful video and audio playback software tools and packaged them in a piece of computer hardware to serve as a kind of Swiss Army Knife for the …
Last reply by cmgoodin, -
- 0 replies
- 966 views
Blackbird Carts are rugged, modular, and useful. Whether you're working out of a bag or need a full production and follow cart we have options for you. And if one of the pre-designed carts doesn't work, we can do a custom build to perfectly suit your needs. LINK to Blackbird Carts
Last reply by Blackbird Carts, -
- 4 followers
- 20 replies
- 4.9k views
Some of the intrepid members here have already guessed, quite accurately as it turns out, what we are announcing today: https://www.lectrosonics.com/US/DCHT-Digital-Camera-Hop-Transmitter/product.html -Karl
Last reply by PhilDent, -
- 1 follower
- 4 replies
- 1.2k views
Over the last year, Lectrosonics repair times at the factory had drug out to 5 to 6 weeks. This was due to the large number of re-blocks from the television industry as the FCC forced the stations out of the auctioned frequencies. We received literally hundreds of units from each of the major networks. We finally had to run two separate service paths so that re-blocking didn't completely freeze out the regular repairs, i.e., the talent dropped it in the toilet. We were still overloaded and repair times stretched out way too far. Hiring more techs is difficult since they don't grow on trees, demand is at an all time high, and fewer persons are going into the te…
Last reply by David W White, -
- 1 follower
- 24 replies
- 5.3k views
My first overseas shipment was FedEx AWB 8406 5847 1023 on 28th July 2003 to Mr Dave Diamond (DD) in Los Angeles USA. It was a big call for Mr Diamond to buy a sound cart (SU) from someone a world away, sight unseen and money up front. I have named my new cart after Dave Diamond. The DD cart
Last reply by Roy, -
- 5 followers
- 51 replies
- 9.6k views
The Tonmeister App is finally online and we added some more neat and free of charge features. https://itunes.apple.com/us/app/tonmeister/id931110535?l=de&ls=1&mt=8 (In response to the big amount of interest, feedback and questions I opened this new thread so nobody has to jump to the last page of our NAB thread all the time.) We are all sincerely sorry for the delay! To give you a more detailed explanation please read the6 new products thread. We think that the additional development time resulted in a more reliable app and we hope that you will like the tool. Please share your thoughts. We hope that we can grow this software together …
Last reply by Fauzan, -
- 1 follower
- 36 replies
- 7.2k views
http://www.lectrosonics.com/US/lectrosonics-introduces-the-venue-2-six-channel-modular-receiver-featuring-iq-filtering-and-digital-hybrid-wireless-technology.html New features include 75 MHz tuning (3 Lectrosonics blocks), Ethernet for control/programming/monitoring, IR sync, and iQ dynamic tracking filters, plus a few additional minor enhancements including a new high-resolution display and menu-selectable antenna power. We plan to begin shipping them in November. I'm happy to answer any questions!
Last reply by karlw, -
- 1 follower
- 3 replies
- 881 views
Via firmware, you can update your Duet system for AES 256-bit CTR mode encryption. Info here: https://www.lectrosonics.com/lectrosonics-adds-encryption-to-its-award-winning-duet-system-via-firmware-update.html -Karl
Last reply by vins, -
- 10 followers
- 61 replies
- 8.9k views
I've been absent from the forum for a couple of years as I pursued a career in industrial design. Hello again! I'll be selling my gear pretty soon, but in the meantime, I can announce the first new Abetek product in quite some time. I was able to partner with my company in a joint venture to bring this out. For everyone who uses a lot of NiMH AAs, this is for you. On many shoots I was using at least two racks of 12 AAs per day. At the end of the day, unloading all the batteries to be charged, and reloading them the next day, was a hassle. So I can now present to you, my baby, the RadCad. It pretty much does what it says on the ti…
Last reply by OnTheSoundSideOfLife, -
- 9 replies
- 1.8k views
Hi everyone! (picture is of my previous charger) Well i received some calls and mails about the chargers i made in de the past. Besides me posting in the manufacturing forum i am just a normal dude making them for fun and maybe some profit on the side. But that was never the intend when i started it, i build the first version just for a friend of mine. Now after making a few, i come to the conclusion that if i would want to provide chargers i need to change things up, first off the electronics are not being made anymore and besides that the quality of the supplier was rather random (that's why i tested all chargers beyond normal before i shipped, eve…
Last reply by WrineX, -
- 1 follower
- 6 replies
- 1.1k views
The Venue 2 receiver system was made available this week in the 941 Band. This band is open to Part 74 users (sound mixers) and has become a defacto traveling band. Part 15 (unlicensed users) are excluded. Four models of transmitters are available in the 941 band. Currently, users are seeing very clean scans in these bands. See info at : https://www.lectrosonics.com/lectrosonics-venue2-receiver-system-now-available-in-941-960-mhz-band.html Best Regards, Larry Fisher
Last reply by LarryF, -
- 3 replies
- 772 views
Showing once again that Smoking Tumbleweeds is deleterious to your mental health. Best Regards, Larry Fisher
Last reply by drpro, -
- 0 replies
- 855 views
New Brighter LED Display New brighter LEDs is available in the new FDC A2 Timecode Generator Display/Slate as well as upgrades for current owners of any of our previous slates. More details about the FDC A2, Upgrade paths, photos and prices are all available at: https://fuzeti.com/index.php?route=extension/pavoblog/single&pavo_post_id=29 FDC A2 in direct sunlight at max brightness/min brightness MRE New vs. Old LEDs
Last reply by George Tsai, -
- 1 follower
- 14 replies
- 3.8k views
Welcome all users of this forum. I would like to present our company offer. In adicam we manufacture transport carts, repair video equipment and undertake special orders. Many years of experience and passion for what we do have resulted in a product line focused on solution of all types of difficulties and problems that seem to be an inseparable part of working on a professional film set. We invite you to familiarize with our offer at www.adicam.pl Below is a short instructional video with our products.
Last reply by adicam, -
- 0 replies
- 975 views
If you are at IBC, please stop by and see the latest - https://www.sounddevices.com/product/833/
Last reply by jon_tatooles, -
- 1 follower
- 4 replies
- 2.6k views
For Schoeps MiniCMIT (Ref: E-OSIX-MiniCMIT) and DPA 4017C (Ref: E-OSIX-4017C). Indoor use, foam only. For harder protection...choose the COSI ! Same swivel than COSI, full options. Available Mid-September. Come and see us at the IBC in Amsterdam, booth 12.F30, with Transvideo/Aaton !
Last reply by cineli, -
- 0 replies
- 1.1k views
A lot of work to achieve a dedicated fit for the new CMC-1U ! The CUT60 is highly recommended for booming ! We created a specific COSI-XS cage version for this microphone (with or without CUT60), but a regular S version will do the job perfectly ! A specific holder has to be used (COSI-HLD-CMC1U).
Last reply by cineli, -
- 1 follower
- 0 replies
- 726 views
Hi all, if you are interested in this position (or any of those listed) or know someone who might be, please apply on our web site following the instructions there. https://lectrosonics.com/jobs/ -Karl
Last reply by karlw, -
- 5 replies
- 1.4k views
For those of you not up to date on our development head on over to our Facebook for some details on the new design using brighter LEDS (no pricing yet): https://www.facebook.com/FUZETi/ For now, I'm looking primarily for input from those who own slates or in the market for one, on what kind of slate sizes you prefer. Be it you only ever use compact slates, only ever use the standard 11" slates, or would like the option to switch back and forth, perhaps even an over sized slate, or whatever use case you have in mind. Below are the prototype panels in comparison to our current MRE slate as well as the basic dimensions of the two panels. Love to hear your thought…
Last reply by KGraham045, -
- 2 followers
- 16 replies
- 2.9k views
https://www.lectrosonics.com/US/lectrosonics-introduces-the-d-squared-digital-wireless-microphone-system.html
Last reply by Constantin, -
- 2 replies
- 1.3k views
Joe D’Augustine and I have been working to clear out items from Chinhda’s old shop and we have available several brackets to hold Sound Devices 744/702 recorders. For anyone not familiar with Chinhda, he was a machinist and engineer of remarkable skill and ingenuity. He began making specialty carts for Mike Denecke and went on to build carts for many of the top sound mixers. A remembrance of him can be found in the Spring 2018 edition of Production Sound and Video: https://magazine.local695.com/magazine/spring-2018/chinhda The bracket holds a 744/702 series recorder securely. Like all of Chinhda’s products, no modification of the recorder is …
Last reply by David Waelder, -
- 1 reply
- 742 views
http://www.cinegearexpo.com/la-expo-attendee-registration Some of the Audio companies participating: Lectrosonics, Sennheiser, Aaton and K-Tek. (K-Tek will have the new KlassicPro boom pole...Also the crew from Levitate showing the boom pole “Airframe Exoskeleton” in the K-Tek booth.)
Last reply by DanieldH, -
- 2 followers
- 1 reply
- 839 views
At long last, we have native versions of Wireless Designer now available for both Mac and PC. https://www.lectrosonics.com/Support/Wireless-Designer™/wireless-designer-2.html -Karl
Last reply by codyman, -
- 8 replies
- 2.2k views
Hi all, I'm prepping for a film in Asheville and need to get local frequency compliant radio mics with racked RX, some program monitoring TX/RX too. What are the nearest reputable companies I could be looking at? Everything nearby seems to be video A/V so any pointers will be gratefully received. I'll also be needing an assistant/trainee. Where is the best source for that? Please forgive me but I'm new to using this rather wonderful site and haven't learnt my way round it yet. Warm regards, Julian
Last reply by BAB414, -
- 0 replies
- 746 views
Because of popular demand... ..... K-Tek Articulated Boompole !!!! The KA113CCR, internally coiled cabled is available in 9'7" length (extended), 2'5" (collapsed) The KA113, uncabled is available in 9'5" length (extended), 2'2" (collapsed) Watch this short, but very convincing video review 😉 https://youtu.be/tBVHOSjzYpI Thank you Jared Elkin for reviewing the Articulated Pole! #ktekpro #ktek #articulatedboom #boompole #bestpoleever #ktekbooms #setlife #weheartourcustomers
Last reply by Brenda Klemme,
