Jump to content

mark kirchner

Members
  • Posts

    184
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by mark kirchner

  1. It would be great if you could post a photo or a diagram of what the capsule looks like. It’s been over 5 years since I did my repair, so my original post was delayed.
  2. Have you repaired a MKE2 capsule yourself?
  3. Sennheiser MKE2 Repair This MKE2 lavalier microphone had a broken solder joint at the capsule. If the capsule was twisted the signal would go from normal audio to pops and clicks with no audio. I decided to cut away the plastic housing. As expected, one of the solder joints had broken. I soldered the connection and the microphone worked as normal. Next I took some strong black nylon thread and wrapped the end of the black cable. I used a “snelling knot” that fishermen use to snell a hook. I wanted the nylon to bite into the cable to help the epoxy hold tightly to the cable. Then I painted on clear 5 minute epoxy, covering the nylon and the solder joint. A second coat of epoxy was done, this time the capsule was rotated to help the epoxy creat a nice round shape. This made a similar durable replacement for the original plastic housing that cut away. The epoxy could have been tinted black with model paints. Good luck, Mark Kirchner
  4. I use Sound Guys Solutions quick mount with the locking stud with my MKH816 and Rycote with no problems.
  5. Measure just the part of the antenna that is above the connector.
  6. Paul, See post number 40. I think it will answer your question. mark
  7. Hi Vin, My wife and I will give one of your recipes a try. Thanks for sharing. mark
  8. See photo number 1. The part numbers stickers are in the shot.
  9. https://www.lectrosonics.com/images/PDFs/wg2000.pdf
  10. I found this wireless guide by Lectrosonics very informative. https://www.lectrosonics.com/images/PDFs/wg2000.pdf
  11. Guys, I am glad everyone had some fun with my DIY. The image has been on my phone for almost a year and I am happy that I can delete it now.
  12. I looked for the Lectrosonics annual April 1 post this morning, but did not find one. Happy April 1sts.
  13. I am looking for recommendations for the next step in my power distribution bow. Thinking of putting it into a pelican case.
  14. Hi Trey, I do not have the single battery model. LTs and SMDWDs only.
  15. Max, I thought I would test some Eneloop Pro batteries in a SMDWB today. SMDWB @ 50mW Backlit On LED On 7 + hours
  16. Just a heads up. The “Lectrosonics Family” lost Howard Kaufman last week. I think you will get a response to your questions, but it may take a little longer. Check out the Lectrosonics Instagram page for more information about Howard’s legacy. My condolences to his family and his Lectrosonics family.
  17. http://txsound.com/blog/obsession-with-fake-sennheiser-mkh416-microphones/
  18. The best way to search the JWSound site is to use google and add jwsound to the starch topic like this - long shotgun microphones jwsound
  19. Sean, I believe you can send the cos11 to Japan for repair. I have had Wilcox Sound repair 2 Cos 11 lavs for me. What did slow my repair down was that Sanken was back ordered on repair parts for white Cos 11 mics. Sorry to hear you had poor service from Wilcox. There is a guy on JW Sound from Istanbul that is repairing Cos-11s to. best mark
  20. I bet if you gave the exact model number of the 3pin Lemo connector someone will have your answer. I have only wired 4 & 5 pin solder type Lemo connector myself.
  21. Contact Lemo. They post good information on their website.
  22. I sent an email to Ambient. I will post the reply, but still curious if anyone ran into this problem. mark
  23. Ambient Eumel EMP 5 S Voltage Inconsistencies I was testing the voltage on 4 Ambient Eumel EMP 5S 48V power converter and found the following: EMP # 1 Voltage on Pins 1 & 2 = 6.15V and on Pins 1 & 3 = 2.18V EMP # 2 Voltage on Pins 1 & 2 = 6.15V and on Pins 1 & 3 = 2.18V EMP # 3 Voltage on Pins 1 & 2 = 6.15V and on Pins 1 & 3 = 0V EMP # 4 Voltage on Pins 1 & 2 = 6.15V and on Pins 1 & 3 = 0V All 4 Eumel EMP 5 S units will work with my Sanken COS 11-D, Sennheiser MKE2 which are wired for Lectrosonics servo bias. My Countryman B6s (servo wiring ) will work on the EMP #1 and #2, but will not work with EMP #3 and #4 due to lack of audio signal/voltage on pin 3. My Question. Has anyone had this problem or know of a change that Ambient made in the past? I am getting ready to take the units apart to compare the different units, but I thought I would ask here first. Many Thanks, mark
  24. You should build this type of antenna for one of your transmitters. It is Omni directional, most antennas for receivers are directional like log periodic dipole array (LPDA) “Shark Fin” antennas.
×
×
  • Create New...