Jump to content

Martin Jelovsek

Members
  • Posts

    25
  • Joined

  • Last visited

Everything posted by Martin Jelovsek

  1. How old was the card? I had problem with one card that I “used too long” ... Try the software Howy recommends if it can recover the files for you. Martin
  2. New development ... I guess I have gremlins here as there is no other explanation ... Now everything works !!?? No idea why and what is more worrisome for me is that I do not know why now everything works but on Saturday did not ... Martin
  3. John yes I have tried everything I could think of ... The funny thing is that if I use the same cable and use it to jam slate and then use slate as master and jam the recorders back ... it works ... with the same cable ... It just does not work between the recorders ... I tried in both directions ... Martin
  4. Well the first problem is that I do not get the signal in ... in the TC page the top TC is static and is not running, but if I connect for instance slate I am getting the signal in ...
  5. Hi John, thank you for warning but that was actually one of the first things I checked ... Martin
  6. Hi guys,I have just encountered 2 strange problems regarding TC with which I am going slightly mad.1. - I wanted to connect two recorders together (one is Deva 16 the other Fusion 12) so I could record with the same TC but I cannot get the TC signal from one recorder to another.But if I use the same cable and connect the external slate - Denecke TS-C I get the signal in ... And if then I use the same cable (just turn it around) and use the output from the slate to the device (Deva or Fusion) I get the TC signal into the recorder.I just cannot get the signal from one recorder to another.2. Then I wanted to connect the TC box (I have Timecode Buddy Pulse) so recorder would be master and then would jam the external box. I do not get any signal out of the recorder ... Again I tested it with the Denecke slate in between and everything works... Now I suspect that something is going on with the signals (could it be that it is too hot?) but I have no idea if that is the case ... Martin
  7. Hi guys I hope that you will be able to help me as this is bugging me for couple of days now The other day we had a discussion with couple of friends and one of them asked me a question on what type of microphones and headsets did the first astronauts use for communication? Was it dynamic, electret, condenser ... It got me curious and actually I cannot find the answer to that question ... If anybody here has any idea what was it used at the time? And who was developing them for them? Thank you for the help Martin
  8. Shooting commercial and it got crazy Sent from my iPhone using Tapatalk
  9. Guardian of the sound Sent from my iPhone using Tapatalk
  10. On shoot of Slovenian motion picture Sent from my iPhone using Tapatalk
  11. Thank you, Jeff. I am really proud of this picture Martin
  12. Well as we were finishing shooting in Liauing Museum in Austria I found myself in empy set / room so I kind of did this picture that I consider ART Martin
  13. Well it was actually taken a month ago on a set when I went to record some ambient sound of the area ... Location: near Pag on island Pag, Croatia Martin
  14. Better later than never ... @osa I would recommend it to check the firmware as with me it started working after update and now it works without the glitch. The only thing is be sure to mark the cable-ends (which one is IN an which one is OUT). I did not do it with one cable and then it took me awhile to figure it out ... Martin
  15. @soundchris I will do the tests next week as I got couple of projects and right now I do not have time for this. I will post the results Martin
  16. Hi Jeff, well it is demand from one of the clients that we have to have this disabled (as you guessed it is security issue) ... I know I can disable external drives with Open directory server, but then I have a problem that I cannot connect to our local Raid disks (they are connected via network) ... It is this stupid frustrating situation, for which I am trying to find solution but no avail Martin
  17. ​Hey soundcris, thank you for the idea but the problem is I would like to disable all the USB disks connected to the computer ... Regards Martin
  18. Hi guys, on couple of our machines I need to disable mounting of external drives (USB and FireWire). I tried to unload and then delete the .kext files in System/Library but no avail ... After reboot I can still connect and see the external drives. Does anyone here have any idea what else to try? Regards Martin Jelovsek
  19. Uf this is easy - iFixIT Pro Tech Toolkit is always with me. https://www.ifixit.com/Info/Toolkits Plenty of different bits and I have not found the electronics I could not open it ... I even saved producers couple of times, and one time we fixed broken computer ... Was the hero of the day he he Martin
  20. Why are you angry if I yell into the microphone ?
  21. I usually send the production this link ... http://filmsound.org/production-sound/openletter.htm Regards Martin
  22. Hey guys thank you for all the ideas what to listen Here are couple of my picks ... TV Show From earth to the moon - TV Show Airwolf - Documentary Le Peuple Migrateur (Winged Migration) - And the last one - music from a movie Hannibal - Vide Cor Meum - Martin
  23. Hi Howy, thank you ... I upgraded the firmware to QRX-330 and now the commands work Martin J.
  24. Hi guys, I hope that you could help me. I would like to make myself an USB serial cable for connecting 3 QRXs together. The problem is that I have already done one as it said in the manual but it did not work. I have connected the pins on USBs like this: QRX USB OUT -> QRX USB IN 2 -> 1 3 -> 4 If I try to change gain on the slave unit it does not work ... Now I am not sure if I did the cable right ... Thank you for all the ideas and help you could give me Martin J.
×
×
  • Create New...